From: Liu Gang <[email protected]> 3.12-stable review patch. If anyone has any objections, please let me know.
=============== commit d71cf15b865bdd45925f7b094d169aaabd705145 upstream. >From the beginning of the gpio-mpc8xxx.c, the "handle_level_irq" has being used to handle GPIO interrupts in the PowerPC/Layerscape platforms. But actually, almost all PowerPC/Layerscape platforms assert an interrupt request upon either a high-to-low change or any change on the state of the signal. So the "handle_level_irq" is not reasonable for PowerPC/Layerscape GPIO interrupt, it should be "handle_edge_irq". Otherwise the system may lost some interrupts from the PIN's state changes. Signed-off-by: Liu Gang <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Jiri Slaby <[email protected]> --- drivers/gpio/gpio-mpc8xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 2aa3ca215bd6..d5376aa1c5e1 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -295,7 +295,7 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq, mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data; irq_set_chip_data(virq, h->host_data); - irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq); + irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_edge_irq); return 0; } -- 2.10.2
