Hi, I have a laptop Toshiba A70, I attach a DMESG so you know my system.
The problem is that the system hang randomly and I don't know why, I can se nothing on /var/log/message realted to the hang (I have to force a shutdown first). With the NOAPIC option the hang just delay or dismish in frequency. Sometimes the mouse still can move. I can't work in my comp. like this, I have posted many messages to suse forum, and other forums but nobody help me. I'm a primary Linux user, I'm a little disapointed because I have not been able to find the solution since monts. I've posted may messages to suse forums, and other forums but with no solution. Here is my most recent post: http://forums.suselinuxsupport.de/ even writing the middle of this email my laptop get hanged (I booted without the noapic option). Thank you in advance. -- Xavier Callejas International Bonded Couriers El Salvador +503 2250-5900 ¡Toda una Organización Mundial a Su Servicio! ------------------------------------------------------ Open Your Mind, Use Open Source.
Linux version 2.6.20-245-xavier ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Feb 26 15:00:17 CST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2 copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3 copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4 copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2 copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data) BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS) BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 447MB LOWMEM available. found SMP MP-table at 000f6ae0 Entering add_active_range(0, 0, 114544) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114544 HighMem 114544 -> 114544 early_node_map[1] active PFN ranges 0: 0 -> 114544 On node 0 totalpages: 114544 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 862 pages used for memmap Normal zone: 109586 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6b40 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf75dd2 ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1bf7af24 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bf7af98 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75e02 ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000) Detected 3066.623 MHz processor. Built 1 zonelists. Total pages: 113650 Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 447488k/458176k available (1696k kernel code, 10140k reserved, 659k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB) .init : 0xc0354000 - 0xc0381000 ( 180 kB) .data : 0xc02a81db - 0xc034d054 ( 659 kB) .text : 0xc0100000 - 0xc02a81db (1696 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6138.10 BogoMIPS (lpj=3069052) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done ACPI: Core revision 20060707 ACPI: successfully read 16816 bytes from file /DSDT.aml ACPI: Override [DSDT- SB200] from initramfs - tainting kernel ACPI (tbget-0297): Table [DSDT] replaced by host OS [20060707] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6132.68 BogoMIPS (lpj=3066343) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01 Total of 2 processors activated (12270.79 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=156 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x1080-0x1080 has been reserved pnp: 00:07: ioport range 0x220-0x22f has been reserved pnp: 00:07: ioport range 0x40b-0x40b has been reserved pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e8100000-e81fffff PREFETCH window: f0000000-f7ffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 0000a400-0000a4ff IO window: 0000a800-0000a8ff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff PCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: e8200000-e82fffff PREFETCH window: 30000000-33ffffff ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 3137k freed Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1172687956.253:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI Error (evregion-0317): No handler for Region [ECR_] (db73abb4) [EmbeddedControl] [20060707] ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20060707] ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.EPWR.PCLK] (Node db739c48), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q1E] (Node db7438ec), AE_NOT_EXIST vesafb: framebuffer at 0xf0000000, mapped to 0xdc880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:52d0 vesafb: pmi: set display start = c00c533e, set palette = c00c5378 vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:00:14.6 disabled floppy0: no floppy controllers found PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 180k freed input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 input: AT Translated Set 2 keyboard as /class/input/input3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > Probing IDE interface ide1... hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: Processor [CPU1] (supports 8 throttling states) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. lp: driver loaded but no devices found ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 ALSA sound/pci/atiixp_modem.c:503: atiixp-modem: codec reset timeout usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux agpgart interface v0.101 (c) Dave Jones piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (svn r2144) hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 8139too Fast Ethernet driver 0.9.28 agpgart: Detected Ati IGP9100/M chipset agpgart: AGP aperture is 32M @ 0xea000000 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000 ath_pci: 0.9.4.5 (svn r2144) usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd usb usb1: SerialNumber: 0000:00:13.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd usb usb2: SerialNumber: 0000:00:13.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.20-245-xavier ehci_hcd usb usb3: SerialNumber: 0000:00:13.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18 eth0: RealTek RTL8139 at 0xdd02a000, 00:0f:b0:54:f3:17, IRQ 18 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19 ath_rate_sample: 1.2 (svn r2144) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP usb 1-1: new low speed USB device using ohci_hcd and address 3 wifi0: mac 5.9 phy 4.3 radio 4.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xe8200000, irq=19 usb 1-1: new device found, idVendor=09da, idProduct=0006 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Mouse usb 1-1: Manufacturer: A4Tech usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: A4Tech USB Optical Mouse as /class/input/input4 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 722916k swap on /dev/hda2. Priority:-1 extents:1 across:722916k Adding 208804k swap on /dev/hda9. Priority:-2 extents:1 across:208804k omnibook: Driver version 2.20060921-trunk. omnibook: Toshiba Satellite A70 detected. omnibook: Begin table match of blank feature. omnibook: Try to init cdimode omnibook: Fail to find a supported LPC I/O bridge, please report omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 1. omnibook: LCD backlight turn off at console blanking is enabled. omnibook: Begin table match of bluetooth feature. omnibook: Try to init ACPI backend omnibook: ACPI EC device found omnibook: ACPI backend init OK omnibook: Returning table entry nr 0. omnibook: get_wireless raw_state: 5 omnibook: Begin table match of cooling feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling cooling. omnibook: Begin table match of display feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Begin table match of hotkeys feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling hotkeys. omnibook: version feature has no backend table, io_op not initialized. omnibook: dmi feature has no backend table, io_op not initialized. omnibook: Begin table match of lcd feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 2. omnibook: Begin table match of temperature feature. omnibook: Returning table entry nr 0. omnibook: Begin table match of touchpad feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling touchpad. omnibook: Begin table match of wifi feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: get_wireless raw_state: 5 omnibook: Begin table match of throttling feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Enabled features: blank bluetooth display version dmi lcd temperature wifi throttling. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] loop: loaded (max 8 devices) NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode reiserfs: using flush barriers ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1172687982.929:2): AppArmor initialized IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 audit(1172709600.600:3): audit_pid=3204 old=0 by auid=4294967295 eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.25.0 20060524 on minor 0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode [drm] Setting GART location based on old memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs NET: Registered protocol family 17 ath0: no IPv6 routers present
00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01) 00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01) 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01) 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18) 00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) 01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Module Size Used by wlan_wep 6656 1 af_packet 20744 4 radeon 111008 2 drm 73748 3 radeon ipv6 246976 14 cpufreq_conservative 7304 0 cpufreq_ondemand 8204 2 cpufreq_userspace 4520 0 cpufreq_powersave 2048 0 acpi_cpufreq 8728 0 speedstep_lib 4868 0 freq_table 4744 2 cpufreq_ondemand,acpi_cpufreq snd_pcm_oss 46592 0 snd_mixer_oss 16256 1 snd_pcm_oss snd_seq 50672 0 snd_seq_device 8332 1 snd_seq button 7952 0 battery 9988 0 ac 5252 0 apparmor 48788 0 aamatch_pcre 14208 1 apparmor nls_iso8859_1 4352 1 nls_cp437 6016 1 vfat 12288 1 fat 48796 1 vfat reiserfs 220544 2 nls_utf8 2304 1 ntfs 203668 1 loop 16520 0 dm_mod 53324 0 omnibook 57396 0 backlight 6016 1 omnibook usbhid 34144 0 hid 22912 1 usbhid ff_memless 5384 1 usbhid wlan_scan_sta 12544 1 ath_rate_sample 12032 1 pcmcia 35092 0 firmware_class 9600 1 pcmcia ath_pci 88480 0 yenta_socket 25100 1 rsrc_nonstatic 10752 1 yenta_socket 8139too 25344 0 mii 5504 1 8139too ide_cd 36768 0 cdrom 33184 1 ide_cd pcmcia_core 37268 3 pcmcia,yenta_socket,rsrc_nonstatic wlan 181956 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci shpchp 31124 0 ehci_hcd 29452 0 ath_hal 191568 3 ath_rate_sample,ath_pci ohci_hcd 18820 0 ati_agp 8844 1 snd_atiixp 19468 1 pci_hotplug 29376 1 shpchp i2c_piix4 8460 0 i2c_core 20736 1 i2c_piix4 agpgart 30408 2 drm,ati_agp usbcore 107092 3 usbhid,ehci_hcd,ohci_hcd snd_atiixp_modem 16264 1 snd_ac97_codec 90404 2 snd_atiixp,snd_atiixp_modem ac97_bus 2560 1 snd_ac97_codec snd_pcm 77828 4 snd_pcm_oss,snd_atiixp,snd_atiixp_modem,snd_ac97_codec snd_timer 22148 2 snd_seq,snd_pcm snd 54276 13 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm,snd_timer soundcore 7648 1 snd snd_page_alloc 10120 3 snd_atiixp,snd_atiixp_modem,snd_pcm parport_pc 36708 0 lp 11172 0 parport 33736 2 parport_pc,lp ext3 128008 2 mbcache 8452 1 ext3 jbd 64052 1 ext3 edd 9284 0 fan 4868 0 thermal 14088 0 processor 30140 2 acpi_cpufreq,thermal atiixp 6288 0 [permanent] ide_disk 15744 9 ide_core 115656 3 ide_cd,atiixp,ide_disk
CPU0 CPU1 0: 259246 0 local-APIC-edge-fasteio timer 1: 659 0 IO-APIC-edge i8042 8: 2 0 IO-APIC-edge rtc 12: 119 0 IO-APIC-edge i8042 14: 22202 0 IO-APIC-edge ide0 15: 1961 0 IO-APIC-edge ide1 16: 11477 0 IO-APIC-fasteoi yenta, [EMAIL PROTECTED]:0000:01:05.0 17: 479 0 IO-APIC-fasteoi ATI IXP Modem, ATI IXP 18: 3835 0 IO-APIC-fasteoi ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3, eth0 19: 12127 0 IO-APIC-fasteoi wifi0 21: 216 0 IO-APIC-fasteoi acpi NMI: 0 0 LOC: 258806 259815 ERR: 0 MIS: 0