Hi Peter-san,
> From: Peter Chen
> Sent: Wednesday, November 09, 2016 10:39 AM
>
> On Tue, Nov 08, 2016 at 08:14:58PM +0900, Yoshihiro Shimoda wrote:
> > This patch adds sysfs "role" for usb role swap. This parameter can be
> > read and write. If you use this file as the following, you can swap
> > the usb role.
> >
> > For example:
> > 1) Connect a usb cable using 2 Salvator-x boards
> > 2) On A-Device (ID pin is low), you input the following command:
> > # echo peripheral > /sys/devices/platform/soc/ee080200.usb-phy/role
> > 3) On B-Device (ID pin is high), you input the following command:
> > # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role
> >
> > Then, the A-device acts as a peripheral and the B-device acts as a host.
> > Please note that A-Device must input the following command if you
> > want the board to act as a host again. (even if you disconnect the usb
> > cable, since id state may be the same, the A-Device keeps to act as
> > peripheral.)
> > # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> > ---
> > This patch is based on the latest linux-phy.git / next branch.
> > (commit id = 7809cd2ce6abd4f431e4b14e6b1276a7cc842ac4)
> >
> > Since this patch is related to usb, I added email addresses of Greg,
> > Felipe,
> > Peter and USB ML as CC. (This patch doesn't use USB OTG FSM though.)
> >
> > Changes from v3:
> > - Clean up redundant conditions in role_store().
> >
> > Changes from v2:
> > - Modify the sysfs file name to "role", and the argument is "host" or
> > "peripheral". Peter suggested this. Thank you!
> >
> > Changes from v1:
> > - rebase the latest next branch.
> >
> > .../ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 | 15 +++
> > drivers/phy/phy-rcar-gen3-usb2.c | 118
> > ++++++++++++++++++++-
> > 2 files changed, 132 insertions(+), 1 deletion(-)
> > create mode 100644
> > Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> >
> > diff --git a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> > new file mode 100644
> > index 0000000..6212697
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> > @@ -0,0 +1,15 @@
> > +What: /sys/devices/platform/<phy-name>/role
> > +Date: October 2016
> > +KernelVersion: 4.10
> > +Contact: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> > +Description:
> > + This file can be read and write.
> > + The file can show/change the phy mode for role swap of usb.
> > +
> > + Write the following strings to change the mode:
> > + "host" - switching mode from peripheral to host.
> > + "peripheral" - switching mode from host to peripheral.
> > +
> > + Read the file, then it shows the following strings:
> > + "host" - The mode is host now.
> > + "peripheral" - The mode is peripheral now.
> > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c
> > b/drivers/phy/phy-rcar-gen3-usb2.c
> > index 3d97ead..3f712b4 100644
> > --- a/drivers/phy/phy-rcar-gen3-usb2.c
> > +++ b/drivers/phy/phy-rcar-gen3-usb2.c
> > @@ -70,6 +70,7 @@
> > #define USB2_LINECTRL1_DP_RPD BIT(18)
> > #define USB2_LINECTRL1_DMRPD_EN BIT(17)
> > #define USB2_LINECTRL1_DM_RPD BIT(16)
> > +#define USB2_LINECTRL1_OPMODE_NODRV BIT(6)
> >
> > /* ADPCTRL */
> > #define USB2_ADPCTRL_OTGSESSVLD BIT(20)
> > @@ -161,6 +162,43 @@ static void rcar_gen3_init_for_peri(struct
> > rcar_gen3_chan *ch)
> > schedule_work(&ch->work);
> > }
> >
> > +static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
> > +{
> > + void __iomem *usb2_base = ch->base;
> > + u32 val;
> > +
> > + val = readl(usb2_base + USB2_LINECTRL1);
> > + writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
> > +
> > + rcar_gen3_set_linectrl(ch, 1, 1);
> > + rcar_gen3_set_host_mode(ch, 1);
> > + rcar_gen3_enable_vbus_ctrl(ch, 0);
> > +
> > + val = readl(usb2_base + USB2_LINECTRL1);
> > + writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
> > +}
> > +
> > +static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
> > +{
> > + rcar_gen3_set_linectrl(ch, 0, 1);
> > + rcar_gen3_set_host_mode(ch, 0);
> > + rcar_gen3_enable_vbus_ctrl(ch, 1);
> > +}
> > +
> > +static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
> > +{
> > + void __iomem *usb2_base = ch->base;
> > + u32 val;
> > +
> > + val = readl(usb2_base + USB2_OBINTEN);
> > + writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> > +
> > + rcar_gen3_enable_vbus_ctrl(ch, 0);
> > + rcar_gen3_init_for_host(ch);
> > +
> > + writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> > +}
> > +
> > static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
> > {
> > return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
> > @@ -174,6 +212,65 @@ static void rcar_gen3_device_recognition(struct
> > rcar_gen3_chan *ch)
> > rcar_gen3_init_for_peri(ch);
> > }
> >
> > +static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
> > +{
> > + return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
> > +}
> > +
> > +static ssize_t role_store(struct device *dev, struct device_attribute
> > *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
> > + bool is_b_device, is_host, new_mode_is_host;
> > +
> > + if (!ch->has_otg || !ch->phy->init_count)
> > + return -EIO;
> > +
> > + /*
> > + * is_b_device: true is B-Device. false is A-Device.
> > + * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
> > + */
> > + is_b_device = rcar_gen3_check_id(ch);
> > + is_host = rcar_gen3_is_host(ch);
> > + if (!strncmp(buf, "host", strlen("host")))
> > + new_mode_is_host = true;
> > + else if (!strncmp(buf, "peripheral", strlen("peripheral")))
> > + new_mode_is_host = false;
> > + else
> > + return -EINVAL;
> > +
> > + /* If current and new mode is the same, this returns the error */
> > + if (is_host == new_mode_is_host)
> > + return -EINVAL;
> > +
> > + if (new_mode_is_host) { /* And is_host must be false */
> > + if (!is_b_device) /* A-Peripheral */
> > + rcar_gen3_init_from_a_peri_to_a_host(ch);
> > + if (is_b_device) /* B-Peripheral */
> > + rcar_gen3_init_for_b_host(ch);
>
> Why not use if-else? The same to below.
Oops! Thank you for the comment. I will fix it and submit v5 patch soon.
> After fixing it, you can add my:
> Reviewed-by: Peter Chen <peter.c...@nxp.com>
Thank you very much for your review!
Best regards,
Yoshihiro Shimoda
> Peter
>
> > + } else { /* And is_host must be true */
> > + if (!is_b_device) /* A-Host */
> > + rcar_gen3_init_for_a_peri(ch);
> > + if (is_b_device) /* B-Host */
> > + rcar_gen3_init_for_peri(ch);
> > + }
> > +
> > + return count;
> > +}
> > +
> > +static ssize_t role_show(struct device *dev, struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
> > +
> > + if (!ch->has_otg || !ch->phy->init_count)
> > + return -EIO;
> > +
> > + return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
> > + "peripheral");
> > +}
> > +static DEVICE_ATTR_RW(role);
> > +
> > static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
> > {
> > void __iomem *usb2_base = ch->base;
> > @@ -351,21 +448,40 @@ static int rcar_gen3_phy_usb2_probe(struct
> > platform_device *pdev)
> > channel->vbus = NULL;
> > }
> >
> > + platform_set_drvdata(pdev, channel);
> > phy_set_drvdata(channel->phy, channel);
> >
> > provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > - if (IS_ERR(provider))
> > + if (IS_ERR(provider)) {
> > dev_err(dev, "Failed to register PHY provider\n");
> > + } else if (channel->has_otg) {
> > + int ret;
> > +
> > + ret = device_create_file(dev, &dev_attr_role);
> > + if (ret < 0)
> > + return ret;
> > + }
> >
> > return PTR_ERR_OR_ZERO(provider);
> > }
> >
> > +static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
> > +{
> > + struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
> > +
> > + if (channel->has_otg)
> > + device_remove_file(&pdev->dev, &dev_attr_role);
> > +
> > + return 0;
> > +};
> > +
> > static struct platform_driver rcar_gen3_phy_usb2_driver = {
> > .driver = {
> > .name = "phy_rcar_gen3_usb2",
> > .of_match_table = rcar_gen3_phy_usb2_match_table,
> > },
> > .probe = rcar_gen3_phy_usb2_probe,
> > + .remove = rcar_gen3_phy_usb2_remove,
> > };
> > module_platform_driver(rcar_gen3_phy_usb2_driver);
> >
> > --
> > 1.9.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
>
> Best Regards,
> Peter Chen
