> > On Thu, Nov 10, 2016 at 12:00:29PM +0000, Winkler, Tomas wrote: > > > > > > > -----Original Message----- > > > From: Greg Kroah-Hartman [mailto:[email protected]] > > > Sent: Thursday, November 10, 2016 09:23 > > > To: Winkler, Tomas <[email protected]> > > > Cc: Usyskin, Alexander <[email protected]>; linux- > > > [email protected]; Jarkko Sakkinen > > > <[email protected]> > > > Subject: Re: [char-misc-next 2/2] mei: send OS type to the FW > > > > > > On Tue, Nov 08, 2016 at 06:26:09PM +0200, Tomas Winkler wrote: > > > > From: Alexander Usyskin <[email protected]> > > > > > > > > Tell the FW that we are running a sane OS and TPM2_ChangeEPS() is > > > > supported. This workaround was added to support other broken OS > > > > and we need to follow here. The command is sent just once at the boot > time. > > > > > > > > Cc: Jarkko Sakkinen <[email protected]> > > > > Signed-off-by: Tomas Winkler <[email protected]> > > > > Signed-off-by: Alexander Usyskin <[email protected]> > > > > --- > > > > drivers/misc/mei/bus-fixup.c | 98 > > > > ++++++++++++++++++++++++++++++++++++++++++++ > > > > 1 file changed, 98 insertions(+) > > > > > > > > diff --git a/drivers/misc/mei/bus-fixup.c > > > > b/drivers/misc/mei/bus-fixup.c index 9e10d86e3887..344a0c99ee44 > > > > 100644 > > > > --- a/drivers/misc/mei/bus-fixup.c > > > > +++ b/drivers/misc/mei/bus-fixup.c > > > > @@ -38,6 +38,9 @@ static const uuid_le mei_nfc_info_guid = > > > > MEI_UUID_NFC_INFO; #define MEI_UUID_WD UUID_LE(0x05B79A6F, > > > 0x4628, 0x4D7F, \ > > > > 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, > > > > 0xAB) > > > > > > > > +#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \ > > > > + 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb) > > > > + > > > > #define MEI_UUID_ANY NULL_UUID_LE > > > > > > > > /** > > > > @@ -69,6 +72,100 @@ static void blacklist(struct mei_cl_device *cldev) > > > > cldev->do_match = 0; > > > > } > > > > > > > > +#define OSTYPE_LINUX 2 > > > > +struct mei_os_ver { > > > > + u16 build; > > > > + u16 reserved1; > > > > > > Don't you need to specify the endian-type of these (well for build), > > > as they get written to hardware? > > > > This is really x86 stuff only (depends on X86), the device lives in > > PCH or SoC, you cannot really plug it into PowerPC. So we are > > consciously not using endian-types in the HW interface. > > Then just mark them all as little endian and be done with it :)
Then I will have to run the leX_to_cpu all over the code, which will really do nothing. I think we already had this discussion in the past, need to search the archive. Thanks Tomas
