On Thu, 10 Nov 2016, Olimpiu Dejeu wrote:

> Resubmition of arcxcnn backlight driver addressing the naming convention
>  concerns raised by Rob H. Note that all the device tree properties are
>  determined by the board design or IC EPROM settings and are not intended
>  to be user adjustable.
> 
> Signed-off-by: Olimpiu Dejeu <olim...@arcticsand.com>

You've dropped Rob's Ack.

> ---
>  .../bindings/leds/backlight/arcxcnn_bl.txt         | 31 
> ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt 
> b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> new file mode 100644
> index 0000000..a7b6ff2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
> @@ -0,0 +1,33 @@
> +Binding for ArcticSand arc2c0608 LED driver
> +
> +Required properties:
> +- compatible: should be "arc,arc2c0608"
> +- reg: slave address
> +
> +Optional properties:
> +- default-brightness: brightness value on boot, value from: 0-4095
> +- label: The name of the backlight device
> +                     See Documentation/devicetree/bindings/leds/common.txt
> +- led-sources: List of enabled channels from 0 to 5.
> +                     See Documentation/devicetree/bindings/leds/common.txt
> +
> +- arc,led-config-0: setting for register ILED_CONFIG_0
> +- arc,led-config-1: setting for register ILED_CONFIG_1
> +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used)
> +- arc,comp-config: setting for register CONFIG_COMP
> +- arc,filter-config: setting for register FILTER_CONFIG
> +- arc,trim-config: setting for register IMAXTUNE
> +
> +Note: Optional properties not specified will default to values in IC EPROM
> +
> +Example:
> +
> +arc2c0608@30 {
> +     compatible = "arc,arc2c0608";
> +     reg = <0x30>;
> +     default-brightness = <500>;
> +     label = "lcd-backlight";
> +     linux,default-trigger = "backlight";
> +     led-sources = <0 1 2 5>;
> +};
> +

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Reply via email to