Conversion from raw values to signed integers has been refactored using
the macros in bitops.h.

Signed-off-by: Tom Levens <[email protected]>
---
 drivers/hwmon/ltc2990.c |   27 ++++++++++-----------------
 1 files changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
index 8f8fe05..0ec4102 100644
--- a/drivers/hwmon/ltc2990.c
+++ b/drivers/hwmon/ltc2990.c
@@ -9,8 +9,12 @@
  * This driver assumes the chip is wired as a dual current monitor, and
  * reports the voltage drop across two series resistors. It also reports
  * the chip's internal temperature and Vcc power supply voltage.
+ *
+ * Value conversion refactored
+ * by Tom Levens <[email protected]>
  */
 
+#include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
@@ -34,19 +38,10 @@
 #define LTC2990_CONTROL_MODE_CURRENT   0x06
 #define LTC2990_CONTROL_MODE_VOLTAGE   0x07
 
-/* convert raw register value to sign-extended integer in 16-bit range */
-static int ltc2990_voltage_to_int(int raw)
-{
-       if (raw & BIT(14))
-               return -(0x4000 - (raw & 0x3FFF)) << 2;
-       else
-               return (raw & 0x3FFF) << 2;
-}
-
 /* Return the converted value from the given register in uV or mC */
-static int ltc2990_get_value(struct i2c_client *i2c, u8 reg, int *result)
+static int ltc2990_get_value(struct i2c_client *i2c, u8 reg, s32 *result)
 {
-       int val;
+       s32 val;
 
        val = i2c_smbus_read_word_swapped(i2c, reg);
        if (unlikely(val < 0))
@@ -55,18 +50,16 @@ static int ltc2990_get_value(struct i2c_client *i2c, u8 
reg, int *result)
        switch (reg) {
        case LTC2990_TINT_MSB:
                /* internal temp, 0.0625 degrees/LSB, 13-bit  */
-               val = (val & 0x1FFF) << 3;
-               *result = (val * 1000) >> 7;
+               *result = sign_extend32(val, 12) * 1000 / 16;
                break;
        case LTC2990_V1_MSB:
        case LTC2990_V3_MSB:
                 /* Vx-Vy, 19.42uV/LSB. Depends on mode. */
-               *result = ltc2990_voltage_to_int(val) * 1942 / (4 * 100);
+               *result = sign_extend32(val, 14) * 1942 / 100;
                break;
        case LTC2990_VCC_MSB:
                /* Vcc, 305.18μV/LSB, 2.5V offset */
-               *result = (ltc2990_voltage_to_int(val) * 30518 /
-                          (4 * 100 * 1000)) + 2500;
+               *result = sign_extend32(val, 14) * 30518 / (100 * 1000) + 2500;
                break;
        default:
                return -EINVAL; /* won't happen, keep compiler happy */
@@ -79,7 +72,7 @@ static ssize_t ltc2990_show_value(struct device *dev,
                                  struct device_attribute *da, char *buf)
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-       int value;
+       s32 value;
        int ret;
 
        ret = ltc2990_get_value(dev_get_drvdata(dev), attr->index, &value);
-- 
1.7.1

Reply via email to