Current DMA implementation was not handling the continuous selection
format viz. SPI chip select would be deasserted even between sequential
serial transfers. Use the cs_change variable and correctly set or
reset the CONT bit accordingly for case where peripherals require
the chip select to be asserted between sequential transfers.
Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
---
drivers/spi/spi-fsl-dspi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index b1ee1f5..41422cd 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -261,6 +261,8 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
SPI_PUSHR_PCS(dspi->cs) |
SPI_PUSHR_CTAS(0);
+ if (!dspi->cs_change)
+ dspi->dma->tx_dma_buf[i] |= SPI_PUSHR_CONT;
dspi->tx += tx_word + 1;
dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
--
2.10.2
