[PATCH 1/6] apalis-tk1: remove spurious new lines

[Marcel Ziswiler]

Remove some spurious new lines.

Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---

 arch/arm/boot/dts/tegra124-apalis-eval.dts |  1 -
 arch/arm/boot/dts/tegra124-apalis.dtsi     | 12 ------------
 2 files changed, 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts 
b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 653044a..2b5a0f3 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -232,7 +232,6 @@
 
        backlight: backlight {
                compatible = "pwm-backlight";
-
                /* BKL1_PWM */
                pwms = <&pwm 3 5000000>;
                brightness-levels = <255 231 223 207 191 159 127 0>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi 
b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0819721..6aa4952 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,6 @@
 
        pcie-controller@01003000 {
                status = "okay";
-
                avddio-pex-supply = <&vdd_1v05>;
                avdd-pex-pll-supply = <&vdd_1v05>;
                avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@
                hdmi@54280000 {
                        pll-supply = <&reg_1v05_avdd_hdmi_pll>;
                        vdd-supply = <&reg_3v3_avdd_hdmi>;
-
                        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
                        nvidia,hpd-gpio =
                                <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -1607,15 +1605,11 @@
                        compatible = "ams,as3722";
                        reg = <0x40>;
                        interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
                        ams,system-power-controller;
-
                        #interrupt-cells = <2>;
                        interrupt-controller;
-
                        gpio-controller;
                        #gpio-cells = <2>;
-
                        pinctrl-names = "default";
                        pinctrl-0 = <&as3722_default>;
 
@@ -1790,7 +1784,6 @@
                        reg = <0x4c>;
                        interrupt-parent = <&gpio>;
                        interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
                        #thermal-sensor-cells = <1>;
                };
        };
@@ -1823,7 +1816,6 @@
        sata@70020000 {
                phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
                phy-names = "sata-0";
-
                avdd-supply = <&vdd_1v05>;
                hvdd-supply = <&reg_3v3>;
                vddio-supply = <&vdd_1v05>;
@@ -1837,7 +1829,6 @@
                       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
                       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
                phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
                avddio-pex-supply = <&vdd_1v05>;
                avdd-pll-erefe-supply = <&avdd_1v05>;
                avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -1919,7 +1910,6 @@
                        usb2-0 {
                                status = "okay";
                                mode = "otg";
-
                                vbus-supply = <&reg_usbo1_vbus>;
                        };
 
@@ -1927,7 +1917,6 @@
                        usb2-1 {
                                status = "okay";
                                mode = "host";
-
                                vbus-supply = <&reg_usbh_vbus>;
                        };
 
@@ -1935,7 +1924,6 @@
                        usb2-2 {
                                status = "okay";
                                mode = "host";
-
                                vbus-supply = <&reg_usbh_vbus>;
                        };
 
-- 
2.5.5