On Tue, 06 Dec 2016, Benjamin Gaignard wrote:

> Add bindings information for STM32 General Purpose Timer
> 
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaign...@st.com>
> ---
>  .../bindings/mfd/stm32-general-purpose-timer.txt   | 39 
> ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> 
> diff --git 
> a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt 
> b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> new file mode 100644
> index 0000000..e92c8be
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> @@ -0,0 +1,39 @@
> +STM32 General Purpose Timer driver bindings
> +
> +Required parameters:
> +- compatible: must be "st,stm32-gptimer"
> +
> +- reg:                       Physical base address and length of the 
> controller's
> +                     registers.
> +- clock-names:               Set to "clk_int".
> +- clocks:            Phandle to the clock used by the timer module.
> +                     For Clk properties, please refer to 
> ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets:            Phandle to the parent reset controller.
> +                     See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm:                       See ../pwm/pwm-stm32.txt
> +- timer:             See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> +     gptimer@40010000 {

I'm not going to push too hard, but I still thing "advanced-control"
would suit better, since this is not *just* a timer.  In fact, the
parent device (the MFD) doesn't have any timer functionality.  That's
what "timer@0" does.

The IP is called "Advanced Control" in the datasheet, no?

> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +             compatible = "st,stm32-gptimer";
> +             reg = <0x40010000 0x400>;
> +             clocks = <&rcc 0 160>;
> +             clock-names = "clk_int";
> +
> +             pwm@0 {
> +                     compatible = "st,stm32-pwm";
> +                     pinctrl-0       = <&pwm1_pins>;
> +                     pinctrl-names   = "default";
> +             };
> +
> +             timer@0 {
> +                     compatible = "st,stm32-timer-trigger";
> +                     reg = <0>;
> +             };
> +     };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Reply via email to