[PATCH] usb: mtu3: enable auto switch from U3 to U2

[Chunfeng Yun]

inform mac2 to build U2 link automatically after U3 detect
fail without software setting soft_connect.

Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
---
 drivers/usb/mtu3/mtu3_core.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index af3e531..ca05021 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -568,6 +568,8 @@ static void mtu3_regs_init(struct mtu3 *mtu)
                                SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
                /* device responses to u3_exit from host automatically */
                mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
+               /* automatically build U2 link when U3 detect fail */
+               mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH);
        }
 
        mtu3_set_speed(mtu);
-- 
1.7.9.5