[PATCH V2 5/5] ARM: BCM53573: Specify USB ports of on-SoC controllers

[Rafał Miłecki]

From: Rafał Miłecki <ra...@milecki.pl>

Broadcom OHCI and EHCI controllers always have 2 ports each on the root
hub. Describe them in DT to allow specifying extra info or referencing
port nodes.

Signed-off-by: Rafał Miłecki <ra...@milecki.pl>
---
 arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index e2c496a..2da04d0 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
                                reg = <0x4000 0x1000>;
                                interrupt-parent = <&gic>;
                                interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               ehci_port1: port@1 {
+                                       reg = <1>;
+                               };
+
+                               ehci_port2: port@2 {
+                                       reg = <2>;
+                               };
                        };
 
                        ohci: ohci@d000 {
@@ -133,6 +144,17 @@
                                reg = <0xd000 0x1000>;
                                interrupt-parent = <&gic>;
                                interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               ohci_port1: port@1 {
+                                       reg = <1>;
+                               };
+
+                               ohci_port2: port@2 {
+                                       reg = <2>;
+                               };
                        };
                };
 
-- 
2.10.1