- Misspelling of some words
- Comment format fix
- Minor fix in coding style
Signed-off-by: Luis Oliveira <loli...@synopsys.com>
---
The purpose of this patch is to fix some comments and styling issues in the
existing code. What is being made here is:
- Sorted the headers files
- Corrected the commentary format
- Reverse tree style in the variables declaration as long as possible
- Add/remove empty lines if needed (style)
- Fix of two misspelled words
drivers/i2c/busses/i2c-designware-core.c | 106 ++++++++++++++--------------
drivers/i2c/busses/i2c-designware-core.h | 3 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 25 +++----
3 files changed, 67 insertions(+), 67 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.c
b/drivers/i2c/busses/i2c-designware-core.c
index 6d81c56184d3..565f4e761edd 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -21,19 +21,20 @@
* ----------------------------------------------------------------------------
*
*/
+#include <linux/delay.h>
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
#include "i2c-designware-core.h"
/*
- * Registers offset
+ * Registers offset.
*/
#define DW_IC_CON 0x0
#define DW_IC_TAR 0x4
@@ -98,13 +99,13 @@
#define DW_IC_ERR_TX_ABRT 0x1
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3))
#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2)
/*
- * status codes
+ * Status codes.
*/
#define STATUS_IDLE 0x0
#define STATUS_WRITE_IN_PROGRESS 0x1
@@ -113,10 +114,10 @@
#define TIMEOUT 20 /* ms */
/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register.
*
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
+ * Only expected abort codes are listed here.
+ * Refer to the datasheet for the full list.
*/
#define ABRT_7B_ADDR_NOACK 0
#define ABRT_10ADDR1_NOACK 1
@@ -158,7 +159,7 @@ static char *abort_sources[] = {
[ABRT_TXDATA_NOACK] =
"data not acknowledged",
[ABRT_GCALL_NOACK] =
- "no acknowledgement for a general call",
+ "no acknowledgment for a general call",
[ABRT_GCALL_READ] =
"read after general call",
[ABRT_SBYTE_ACKDET] =
@@ -207,7 +208,7 @@ i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond,
int offset)
{
/*
* DesignWare I2C core doesn't seem to have solid strategy to meet
- * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
+ * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
* will result in violation of the tHD;STA spec.
*/
if (cond)
@@ -327,9 +328,9 @@ static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
*/
int i2c_dw_init(struct dw_i2c_dev *dev)
{
- u32 hcnt, lcnt;
- u32 reg, comp_param1;
u32 sda_falling_time, scl_falling_time;
+ u32 reg, comp_param1;
+ u32 hcnt, lcnt;
int ret;
ret = i2c_dw_acquire_lock(dev);
@@ -338,29 +339,28 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- /* Configure register endianess access */
+ /* Configure register endianness access. */
dev->accessor_flags |= ACCESS_SWAP;
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
- /* Configure register access mode 16bit */
+ /* Configure register access mode 16bit. */
dev->accessor_flags |= ACCESS_16BIT;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
- dev_err(dev->dev, "Unknown Synopsys component type: "
- "0x%08x\n", reg);
+ dev_err(dev->dev,
+ "Unknown Synopsys component type: 0x%08x\n", reg);
i2c_dw_release_lock(dev);
return -ENODEV;
}
comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
- /* Disable the adapter */
+ /* Disable the adapter. */
__i2c_dw_enable_and_wait(dev, false);
- /* set standard and fast speed deviders for high/low periods */
-
+ /* Set standard and fast speed deviders for high/low periods. */
sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
- /* Set SCL timing parameters for standard-mode */
+ /* Set SCL timing parameters for standard-mode. */
if (dev->ss_hcnt && dev->ss_lcnt) {
hcnt = dev->ss_hcnt;
lcnt = dev->ss_lcnt;
@@ -379,7 +379,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
- /* Set SCL timing parameters for fast-mode or fast-mode plus */
+ /* Set SCL timing parameters for fast-mode or fast-mode plus. */
if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
hcnt = dev->fp_hcnt;
lcnt = dev->fp_lcnt;
@@ -418,11 +418,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
}
}
- /* Configure SDA Hold Time if required */
+ /* Configure SDA Hold Time if required. */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
if (!dev->sda_hold_time) {
- /* Keep previous hold time setting if no one set it */
+ /* Keep previous hold time setting if no one set it. */
dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
}
/*
@@ -440,11 +440,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
"Hardware too old to adjust SDA hold time.\n");
}
- /* Configure Tx/Rx FIFO threshold levels */
+ /* Configure Tx/Rx FIFO threshold levels. */
dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
- /* configure the i2c master */
+ /* Configure the I2C master. */
dw_writel(dev, dev->master_cfg , DW_IC_CON);
i2c_dw_release_lock(dev);
@@ -454,7 +454,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
EXPORT_SYMBOL_GPL(i2c_dw_init);
/*
- * Waiting for bus not busy
+ * Waiting for bus not busy.
*/
static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
{
@@ -477,10 +477,10 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
struct i2c_msg *msgs = dev->msgs;
u32 ic_tar = 0;
- /* Disable the adapter */
+ /* Disable the adapter. */
__i2c_dw_enable_and_wait(dev, false);
- /* if the slave address is ten bit address, enable 10BITADDR */
+ /* If the slave address is ten bit address, enable 10BITADDR. */
if (dev->dynamic_tar_update_enabled) {
/*
* If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
@@ -505,13 +505,13 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
*/
dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
- /* enforce disabled interrupts (due to HW issues) */
+ /* Enforce disabled interrupts (due to HW issues). */
i2c_dw_disable_int(dev);
- /* Enable the adapter */
+ /* Enable the adapter. */
__i2c_dw_enable(dev, true);
- /* Clear and enable interrupts */
+ /* Clear and enable interrupts. */
dw_readl(dev, DW_IC_CLR_INTR);
dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
}
@@ -526,12 +526,12 @@ static void
i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
- u32 intr_mask;
- int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;
bool need_restart = false;
+ int tx_limit, rx_limit;
+ u8 *buf = dev->tx_buf;
+ u32 intr_mask;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
@@ -539,9 +539,9 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
u32 flags = msgs[dev->msg_write_idx].flags;
/*
- * if target address has changed, we need to
- * reprogram the target address in the i2c
- * adapter when we are done with this transfer
+ * If target address has changed, we need to
+ * reprogram the target address in the I2C
+ * adapter when we are done with this transfer.
*/
if (msgs[dev->msg_write_idx].addr != addr) {
dev_err(dev->dev,
@@ -558,7 +558,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
}
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
- /* new i2c_msg */
+ /* New i2c_msg */
buf = msgs[dev->msg_write_idx].buf;
buf_len = msgs[dev->msg_write_idx].len;
@@ -601,7 +601,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- /* avoid rx buffer overrun */
+ /* Avoid rx buffer overrun. */
if (dev->rx_outstanding >= dev->rx_fifo_depth)
break;
@@ -622,7 +622,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
* the transaction here.
*/
if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
- /* more bytes to be written */
+ /* More bytes to be written. */
dev->status |= STATUS_WRITE_IN_PROGRESS;
break;
} else
@@ -687,7 +687,7 @@ i2c_dw_read(struct dw_i2c_dev *dev)
u32 flags = msgs[dev->msg_read_idx].flags;
*buf = dw_readl(dev, DW_IC_DATA_CMD);
- /* Ensure length byte is a valid value */
+ /* Ensure length byte is a valid value. */
if (flags & I2C_M_RECV_LEN &&
*buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
len = i2c_dw_recv_len(dev, *buf);
@@ -724,13 +724,13 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
if (abort_source & DW_IC_TX_ARB_LOST)
return -EAGAIN;
else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
- return -EINVAL; /* wrong msgs[] data */
+ return -EINVAL; /* Wrong msgs[] data. */
else
return -EIO;
}
/*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
*/
static int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -761,13 +761,13 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg
msgs[], int num)
if (ret < 0)
goto done;
- /* start the transfers */
+ /* Start the transfers. */
i2c_dw_xfer_init(dev);
- /* wait for tx to complete */
+ /* Wait for tx to complete. */
if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
dev_err(dev->dev, "controller timed out\n");
- /* i2c_dw_init implicitly disables the adapter */
+ /* i2c_dw_init implicitly disables the adapter. */
i2c_dw_init(dev);
ret = -ETIMEDOUT;
goto done;
@@ -788,13 +788,13 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg
msgs[], int num)
goto done;
}
- /* no error */
+ /* No error. */
if (likely(!dev->cmd_err && !dev->status)) {
ret = num;
goto done;
}
- /* We have an error */
+ /* We have an error. */
if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
ret = i2c_dw_handle_tx_abort(dev);
goto done;
@@ -905,7 +905,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
/*
* Anytime TX_ABRT is set, the contents of the tx/rx
- * buffers are flushed. Make sure to skip them.
+ * buffers are flushed. Make sure to skip them.
*/
dw_writel(dev, 0, DW_IC_INTR_MASK);
goto tx_aborted;
@@ -927,7 +927,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
- /* workaround to trigger pending interrupt */
+ /* Workaround to trigger pending interrupt. */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
dw_writel(dev, stat, DW_IC_INTR_MASK);
@@ -938,10 +938,10 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
- /* Disable controller */
+ /* Disable controller. */
__i2c_dw_enable_and_wait(dev, false);
- /* Disable all interupts */
+ /* Disable all interupts. */
dw_writel(dev, 0, DW_IC_INTR_MASK);
dw_readl(dev, DW_IC_CLR_INTR);
}
@@ -978,7 +978,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
/*
* Test if dynamic TAR update is enabled in this controller by writing
* to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this
- * field is read-only so it should not succeed
+ * field is read-only so it should not succeed.
*/
reg = dw_readl(dev, DW_IC_CON);
dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON);
diff --git a/drivers/i2c/busses/i2c-designware-core.h
b/drivers/i2c/busses/i2c-designware-core.h
index 26250b425e2f..3d13a9f0bb7c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -36,11 +36,10 @@
#define DW_IC_CON_SPEED_FAST 0x4
#define DW_IC_CON_SPEED_HIGH 0x6
#define DW_IC_CON_SPEED_MASK 0x6
-#define DW_IC_CON_10BITADDR_MASTER 0x10
+#define DW_IC_CON_10BITADDR_MASTER 0x10
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
-
/**
* struct dw_i2c_dev - private i2c-designware data
* @dev: driver model device node
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
b/drivers/i2c/busses/i2c-designware-platdrv.c
index 08153ea4d848..989ae0299cd0 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,26 +21,27 @@
* ----------------------------------------------------------------------------
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/dmi.h>
-#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
-#include <linux/io.h>
+#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/platform_data/i2c-designware.h>
+
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -153,11 +154,11 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev
*i_dev, bool prepare)
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
+ struct dw_i2c_dev *dev;
+ u32 acpi_speed, ht = 0;
struct resource *mem;
int irq, r;
- u32 acpi_speed, ht = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
@@ -354,7 +355,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
#define DW_I2C_DEV_PMOPS NULL
#endif
-/* work with hotplug and coldplug */
+/* Work with hotplug and coldplug. */
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
--
2.11.0
