From: Hyungwon Hwang <human.hw...@samsung.com>

This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.

Signed-off-by: Hyungwon Hwang <human.hw...@samsung.com>
Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 33 +++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts 
b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index db879f4..4ad2332 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -252,11 +252,44 @@
                        reg = <1>;
 
                        dsi_out: endpoint {
+                               remote-endpoint = <&dsi_in>;
                                samsung,burst-clock-frequency = <512000000>;
                                samsung,esc-clock-frequency = <16000000>;
                        };
                };
        };
+
+       panel@0 {
+               compatible = "samsung,s6e3ha2";
+               reg = <0>;
+               vdd3-supply = <&ldo27_reg>;
+               vci-supply = <&ldo28_reg>;
+               reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
+               enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+               te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+               power-on-delay = <120>;
+               reset-delay = <5>;
+
+               display-timings {
+                       timing-0 {
+                               clock-frequency = <14874444>;
+                               hactive = <1440>;
+                               vactive = <2560>;
+                               hfront-porch = <1>;
+                               hback-porch = <1>;
+                               hsync-len = <1>;
+                               vfront-porch = <1>;
+                               vback-porch = <15>;
+                               vsync-len = <1>;
+                       };
+               };
+
+               port {
+                       dsi_in: endpoint {
+                               remote-endpoint = <&dsi_out>;
+                       };
+               };
+       };
 };
 
 &hsi2c_0 {
-- 
1.9.1

Reply via email to