On Wed, 2016-12-14 at 14:39 +0100, Linus Walleij wrote:
> The Intel Mid goes in and creates a I2C device for the
> MPU3050 if the input driver for MPU-3050 is activated.
> As of commit 3904b28efb2c
> ("iio: gyro: Add driver for the MPU-3050 gyroscope")
> there is a proper and fully featured IIO driver for this
> device, so deprecate the use of the incomplete input driver
> by augmenting the device population code to react to the
> presence of the IIO driver's Kconfig symbol instead.
>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Andy Shevchenko <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
> Signed-off-by: Linus Walleij <[email protected]>
> ---
> arch/x86/platform/intel-mid/device_libs/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile
> b/arch/x86/platform/intel-mid/device_libs/Makefile
> index dd6cfa4ad3ac..61b5ed2b7d40 100644
> --- a/arch/x86/platform/intel-mid/device_libs/Makefile
> +++ b/arch/x86/platform/intel-mid/device_libs/Makefile
> @@ -19,7 +19,7 @@ obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) +=
> platform_spidev.o
> # I2C Devices
> obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
> obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
> -obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
> +obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o
> obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
> obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
> # I2C GPIO Expanders
--
Andy Shevchenko <[email protected]>
Intel Finland Oy
