Add defines for the AXP288_POWER_REASON and AXP288_RT_BATT_V_H and
AXP288_RT_BATT_V_L and AXP288_BC_* registers. While at it also move the
AXP288_TS_ADC_H-AXP288_GP_ADC_L defines, which for some reason where
in a different place, together with the rest of the AXP288 specific
defines.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
Changes v2:
-New patch in v2 of this set
Changes v3:
-Also add defines for the AXP288_BC_* registers
---
include/linux/mfd/axp20x.h | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index fe93e00..5edf421 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -229,9 +229,20 @@ enum {
#define AXP22X_BATLOW_THRES1 0xe6
/* AXP288 specific registers */
+#define AXP288_POWER_REASON 0x02
+#define AXP288_BC_GLOBAL 0x2c
+#define AXP288_BC_VBUS_CNTL 0x2d
+#define AXP288_BC_USB_STAT 0x2e
+#define AXP288_BC_DET_STAT 0x2f
#define AXP288_PMIC_ADC_H 0x56
#define AXP288_PMIC_ADC_L 0x57
+#define AXP288_TS_ADC_H 0x58
+#define AXP288_TS_ADC_L 0x59
+#define AXP288_GP_ADC_H 0x5a
+#define AXP288_GP_ADC_L 0x5b
#define AXP288_ADC_TS_PIN_CTRL 0x84
+#define AXP288_RT_BATT_V_H 0xa0
+#define AXP288_RT_BATT_V_L 0xa1
/* Fuel Gauge */
#define AXP288_FG_RDC1_REG 0xba
@@ -508,11 +519,6 @@ enum axp809_irqs {
AXP809_IRQ_GPIO0_INPUT,
};
-#define AXP288_TS_ADC_H 0x58
-#define AXP288_TS_ADC_L 0x59
-#define AXP288_GP_ADC_H 0x5a
-#define AXP288_GP_ADC_L 0x5b
-
struct axp20x_dev {
struct device *dev;
int irq;
--
2.9.3
