hi all, i just moved my win tv dvb-s card (PCI) from my old to my actual pc.
its an ASUS M2N32 WS Professional AMD64 X2 Board equiped with the nvidia nForce 590 SLI MCP chipset. in the past, i had to use the noapic kernel cmdline param to get linux booting and working properly. iirc versions >=2.6.18 of the kernel fixed all of my previous problems, thus i am not using noapic since then. if you would be so kind to provide me some infos, how i would be able to track the problem down _and_ maybe how to fix it. please find two snippets of dmesg after booting 2.6.21-rc3-git (2.6.20-1 has got the same results) best regards marcel snip of logs _normal_ boot on 2.6.21-rc3 git Freeing unused kernel memory: 264k freed saa7146: register extension 'dvb'. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 saa7146: found saa7146 @ mem ffffc20000070000 (revision 1, irq 16) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:1f:6d:3f irq 16: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> [<ffffffff801473d7>] [<ffffffff801475e2>] [<ffffffff80147e97>] [<ffffffff8010a62c>] [<ffffffff8010c0e2>] [<ffffffff8010882e>] [<ffffffff80109a41>] <EOI> [<ffffffff80108857>] [<ffffffff801088bc>] handlers: [<ffffffff88015619>] Disabling IRQ #16 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623 dvb-ttpci: firmware @ card 0 supports CI link layer interface boot on 2.6.21-rc3 git irqpoll option Freeing unused kernel memory: 260k freed saa7146: register extension 'dvb'. ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 saa7146: found saa7146 @ mem ffffc20000026000 (revision 1, irq 16) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:1f:6d:3f dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f12623 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: adac type set to 0 @ card 0 saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input3 dvb-ttpci: found av7110-0. XFS mounting filesystem sda1 later on.... Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1 across:1004052k irq 16: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> [<ffffffff80147763>] [<ffffffff80147982>] [<ffffffff801481a6>] [<ffffffff8010a7cc>] [<ffffffff8010c291>] [<ffffffff80108a3e>] [<ffffffff80109c51>] <EOI> handlers: [<ffffffff88015612>] Disabling IRQ #16 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
