From: Geoff Lansberry <ge...@kuvee.com>

The TRF7970A has configuration options for supporting hardware designs
with 1.8 Volt or 3.3 Volt IO.   This commit adds a device tree option,
using a fixed regulator binding, for setting the io voltage to match
the hardware configuration. If no option is supplied it defaults to
3.3 volt configuration.
---
 .../devicetree/bindings/net/nfc/trf7970a.txt       |  4 ++--
 drivers/nfc/trf7970a.c                             | 28 +++++++++++++++++++++-
 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt 
b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index e262ac1..b5777d8 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -21,9 +21,9 @@ Optional SoC Specific Properties:
 - t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum
   where an extra byte is returned by Read Multiple Block commands issued
   to Type 5 tags.
+- vdd-io-supply: Regulator specifying voltage for vdd-io
 - clock-frequency: Set to specify that the input frequency to the trf7970a is 
13560000Hz or 27120000Hz
 
-
 Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 
 &spi1 {
@@ -41,11 +41,11 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
                                  <&gpio2 5 GPIO_ACTIVE_LOW>;
                vin-supply = <&ldo3_reg>;
                vin-voltage-override = <5000000>;
+               vdd-io-supply = <&ldo2_reg>;
                autosuspend-delay = <30000>;
                irq-status-read-quirk;
                en2-rf-quirk;
                t5t-rmb-extra-byte-quirk;
-               vdd_io_1v8;
                clock-frequency = <27120000>;
                status = "okay";
        };
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index c9cb278..94c31f8 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -444,6 +444,7 @@ struct trf7970a {
        u8                              iso_ctrl_tech;
        u8                              modulator_sys_clk_ctrl;
        u8                              special_fcn_reg1;
+       u8                              io_ctrl;
        unsigned int                    guard_time;
        int                             technology;
        int                             framing;
@@ -1051,6 +1052,11 @@ static int trf7970a_init(struct trf7970a *trf)
        if (ret)
                goto err_out;
 
+       ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
+                       trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
+       if (ret)
+               goto err_out;
+
        ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0);
        if (ret)
                goto err_out;
@@ -1767,7 +1773,7 @@ static int _trf7970a_tg_listen(struct nfc_digital_dev 
*ddev, u16 timeout,
                goto out_err;
 
        ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL,
-                       TRF7970A_REG_IO_CTRL_VRS(0x1));
+                       trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1));
        if (ret)
                goto out_err;
 
@@ -2062,6 +2068,7 @@ static int trf7970a_probe(struct spi_device *spi)
                return ret;
        }
 
+
        of_property_read_u32(np, "clock-frequency", &clk_freq);
        if ((clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) ||
                (clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY)) {
@@ -2105,6 +2112,25 @@ static int trf7970a_probe(struct spi_device *spi)
        if (uvolts > 4000000)
                trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3;
 
+       trf->regulator = devm_regulator_get(&spi->dev, "vdd-io");
+       if (IS_ERR(trf->regulator)) {
+               ret = PTR_ERR(trf->regulator);
+               dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret);
+               goto err_destroy_lock;
+       }
+
+       ret = regulator_enable(trf->regulator);
+       if (ret) {
+               dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret);
+               goto err_destroy_lock;
+       }
+
+
+       if (regulator_get_voltage(trf->regulator) == 1800000) {
+               trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW;
+               dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n");
+       }
+
        trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops,
                        TRF7970A_SUPPORTED_PROTOCOLS,
                        NFC_DIGITAL_DRV_CAPS_IN_CRC |
-- 
Signed-off-by: Geoff Lansberry <ge...@kuvee.com>

Reply via email to