On 12/20/2016 02:23 PM, David Lechner wrote:
> This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx. These
> SoCs have standard 8250 registers plus some extra non-standard registers.
>
> The UART will not function unless the non-standard Power and Emulation
> Management Register (PWREMU_MGMT) is configured correctly. This is
> currently handled in arch/arm/mach-davinci/serial.c for non-device-tree
> boards. Making this part of the UART driver will allow UART to work on
> device-tree boards as well and the mach code can eventually be removed.
>
> Signed-off-by: David Lechner <da...@lechnology.com>
> ---
> drivers/tty/serial/8250/8250_of.c | 1 +
> drivers/tty/serial/8250/8250_port.c | 22 ++++++++++++++++++++++
> include/uapi/linux/serial_core.h | 3 ++-
> include/uapi/linux/serial_reg.h | 8 ++++++++
> 4 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_of.c
> b/drivers/tty/serial/8250/8250_of.c
> index d25ab1c..5281252 100644
> --- a/drivers/tty/serial/8250/8250_of.c
> +++ b/drivers/tty/serial/8250/8250_of.c
> @@ -332,6 +332,7 @@ static const struct of_device_id
> of_platform_serial_table[] = {
> .data = (void *)PORT_ALTR_16550_F128, },
> { .compatible = "mrvl,mmp-uart",
> .data = (void *)PORT_XSCALE, },
> + { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, },
> { /* end of list */ },
> };
> MODULE_DEVICE_TABLE(of, of_platform_serial_table);
> diff --git a/drivers/tty/serial/8250/8250_port.c
> b/drivers/tty/serial/8250/8250_port.c
> index fe4399b..ea854054 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -273,6 +273,15 @@ static const struct serial8250_config uart_config[] = {
> .rxtrig_bytes = {1, 4, 8, 14},
> .flags = UART_CAP_FIFO,
> },
> + [PORT_DA830] = {
> + .name = "TI DA8xx/OMAPL13x/AM17xx/AM18xx",
> + .fifo_size = 16,
> + .tx_loadsz = 16,
> + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
> + UART_FCR_R_TRIG_10,
> + .rxtrig_bytes = {1, 4, 8, 14},
> + .flags = UART_CAP_FIFO | UART_CAP_AFE,
> + },
> };
Any reason why the fcr and flags fields are changed when compared
against PORT_16550A?
>
> /* Uart divisor latch read */
> @@ -2118,6 +2127,19 @@ int serial8250_do_startup(struct uart_port *port)
> serial_port_out(port, UART_LCR, 0);
> }
>
> + if (port->type == PORT_DA830) {
> + /* Reset the port */
> + serial_port_out(port, UART_IER, 0);
> + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0);
> + mdelay(10);
> +
> + /* Enable Tx, Rx and free run mode */
> + serial_port_out(port, UART_DA830_PWREMU_MGMT,
> + UART_DA830_PWREMU_MGMT_UTRST |
> + UART_DA830_PWREMU_MGMT_URRST |
> + UART_DA830_PWREMU_MGMT_FREE);
> + }
> +
> #ifdef CONFIG_SERIAL_8250_RSA
> /*
> * If this is an RSA port, see if we can kick it up to the
> diff --git a/include/uapi/linux/serial_core.h
> b/include/uapi/linux/serial_core.h
> index 99dbed8..a126d05 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -56,7 +56,8 @@
> #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
> #define PORT_RT2880 29 /* Ralink RT2880 internal UART */
> #define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */
> -#define PORT_MAX_8250 30 /* max port ID */
> +#define PORT_DA830 31 /* TI DA8xx/OMAP13x/AM17xx/AM18xx */
> +#define PORT_MAX_8250 31 /* max port ID */
>
> /*
> * ARM specific type numbers. These are not currently guaranteed
> diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
> index b4c0484..0e72eeb 100644
> --- a/include/uapi/linux/serial_reg.h
> +++ b/include/uapi/linux/serial_reg.h
> @@ -327,6 +327,14 @@
> #define SERIAL_RSA_BAUD_BASE (921600)
> #define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
>
> +/* Extra registers for TI DA8xx/OMAP13x/AM17xx/AM18xx */
> +#define UART_DA830_PWREMU_MGMT 12
> +
> +/* PWREMU_MGMT register bits */
> +#define UART_DA830_PWREMU_MGMT_FREE (1 << 0) /* Free-running mode */
> +#define UART_DA830_PWREMU_MGMT_URRST (1 << 13) /* Receiver reset/enable */
> +#define UART_DA830_PWREMU_MGMT_UTRST (1 << 14) /* Transmitter reset/enable */
> +
> /*
> * Extra serial register definitions for the internal UARTs
> * in TI OMAP processors.
>
