Sparse throws following warnings: drivers/thermal/mtk_thermal.c:186:11: warning: symbol 'mt8173_bank_data' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:193:11: warning: symbol 'mt8173_msr' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:197:11: warning: symbol 'mt8173_adcpnp' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:201:11: warning: symbol 'mt8173_mux_values' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:204:11: warning: symbol 'mt2701_bank_data' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:208:11: warning: symbol 'mt2701_msr' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:212:11: warning: symbol 'mt2701_adcpnp' was not declared. Should it be static? drivers/thermal/mtk_thermal.c:216:11: warning: symbol 'mt2701_mux_values' was not declared. Should it be static?
Make these variables as static to fix these warnings. Signed-off-by: Vivek Gautam <vivek.gau...@codeaurora.org> --- Based on Torvald's master branch. Build tested. drivers/thermal/mtk_thermal.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 34169c32d495..1aff7fde54b1 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -183,37 +183,37 @@ struct mtk_thermal { }; /* MT8173 thermal sensor data */ -const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { +static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { { MT8173_TS2, MT8173_TS3 }, { MT8173_TS2, MT8173_TS4 }, { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, { MT8173_TS2 }, }; -const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { +static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2 }; -const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { +static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 }; -const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; +static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; /* MT2701 thermal sensor data */ -const int mt2701_bank_data[MT2701_NUM_SENSORS] = { +static const int mt2701_bank_data[MT2701_NUM_SENSORS] = { MT2701_TS1, MT2701_TS2, MT2701_TSABB }; -const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { +static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 }; -const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { +static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 }; -const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; +static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; /** * The MT8173 thermal controller has four banks. Each bank can read up to -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project