- Slave mode selected in platform module (devicetree support only)
- Check for ACPI - not supported in SLAVE mode:
  - Changed the ifndef style to the use of ACPI_HANDLE that returns NULL
    if the device was not enumerated from ACPI namespace.

Signed-off-by: Luis Oliveira <loli...@synopsys.com>
---
Changes V4->V5: (Andy Shevchenko, Rob Herring, Mark Rutland)
- This is the patch that actually enable SLAVE mode in the platform 
  module by probing the DT nodes (Rob suggestion).
- Changed my device tree. Now I'm using: <reg | I2C_OWN_SLAVE_ADDRESS>
  to identify a Slave.
- I have a new way of checking if ACPI is not enabled using the 
  ACPI_HANDLE and not ifdef.

 drivers/i2c/busses/i2c-designware-platdrv.c | 70 +++++++++++++++++++++++++----
 1 file changed, 62 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c 
b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5cf4df63dbe8..ef75031f8a62 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,6 +21,7 @@
  * ----------------------------------------------------------------------------
  *
  */
+#include <dt-bindings/i2c/i2c.h>
 #include <linux/acpi.h>
 #include <linux/clk-provider.h>
 #include <linux/clk.h>
@@ -143,11 +144,15 @@ static void i2c_dw_configure_master(struct 
platform_device *pdev)
 {
        struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
 
+       dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
        dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
                          DW_IC_CON_RESTART_EN;
 
        dev_dbg(&pdev->dev, "I am registed as a I2C Master!\n");
 
+       dev->mode = DW_IC_MASTER;
+
        switch (dev->clk_freq) {
        case 100000:
                dev->master_cfg |= DW_IC_CON_SPEED_STD;
@@ -160,6 +165,32 @@ static void i2c_dw_configure_master(struct platform_device 
*pdev)
        }
 }
 
+static void i2c_dw_configure_slave(struct platform_device *pdev)
+{
+       struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+
+       dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+       dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+                        DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+                        DW_IC_CON_SPEED_FAST;
+
+       dev_dbg(&pdev->dev, "I am registed as a I2C Slave!\n");
+
+       dev->mode = DW_IC_SLAVE;
+
+       switch (dev->clk_freq) {
+       case 100000:
+               dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+               break;
+       case 3400000:
+               dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+               break;
+       default:
+               dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+       }
+}
+
 static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
 {
        if (IS_ERR(i_dev->clk))
@@ -200,9 +231,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
        struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
        struct i2c_adapter *adap;
        struct dw_i2c_dev *dev;
+       struct fwnode_handle *child;
        u32 acpi_speed, ht = 0;
        struct resource *mem;
        int irq, r;
+       u32 reg;
 
        irq = platform_get_irq(pdev, 0);
        if (irq < 0)
@@ -264,9 +297,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
        if (r)
                return r;
 
-       dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
-       i2c_dw_configure_master(pdev);
+       if (ACPI_HANDLE(&pdev->dev) == NULL) {
+               device_for_each_child_node(&pdev->dev, child) {
+                       fwnode_property_read_u32(child, "reg", &reg);
+                       if (reg & I2C_OWN_SLAVE_ADDRESS)
+                               i2c_dw_configure_slave(pdev);
+                       else
+                               i2c_dw_configure_master(pdev);
+               }
+       } else
+               i2c_dw_configure_master(pdev);
 
        dev->clk = devm_clk_get(&pdev->dev, NULL);
        if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -295,7 +335,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
                pm_runtime_enable(&pdev->dev);
        }
 
-       r = i2c_dw_probe(dev);
+       if (dev->mode == DW_IC_SLAVE)
+               r = i2c_dw_probe_slave(dev);
+       else
+               r = i2c_dw_probe(dev);
+
        if (r && !dev->pm_runtime_disabled)
                pm_runtime_disable(&pdev->dev);
 
@@ -310,7 +354,10 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 
        i2c_del_adapter(&dev->adapter);
 
-       i2c_dw_disable(dev);
+       if (dev->mode == DW_IC_SLAVE)
+               i2c_dw_disable_slave(dev);
+       else
+               i2c_dw_disable(dev);
 
        pm_runtime_dont_use_autosuspend(&pdev->dev);
        pm_runtime_put_sync(&pdev->dev);
@@ -350,7 +397,10 @@ static int dw_i2c_plat_suspend(struct device *dev)
        struct platform_device *pdev = to_platform_device(dev);
        struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
-       i2c_dw_disable(i_dev);
+       if (i_dev->mode == DW_IC_SLAVE)
+               i2c_dw_disable_slave(i_dev);
+       else
+               i2c_dw_disable(i_dev);
        i2c_dw_plat_prepare_clk(i_dev, false);
 
        return 0;
@@ -363,8 +413,12 @@ static int dw_i2c_plat_resume(struct device *dev)
 
        i2c_dw_plat_prepare_clk(i_dev, true);
 
-       if (!i_dev->pm_runtime_disabled)
-               i2c_dw_init(i_dev);
+       if (!i_dev->pm_runtime_disabled) {
+               if (i_dev->mode == DW_IC_SLAVE)
+                       i2c_dw_init_slave(i_dev);
+               else
+                       i2c_dw_init(i_dev);
+       }
 
        return 0;
 }
-- 
2.11.0


Reply via email to