Add OX820 dt-bindings includes files for clocks and resets, replace resets numbers by human readable defines.
Signed-off-by: Neil Armstrong <[email protected]> --- arch/arm/boot/dts/ox820.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index e40f282..4592075 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -8,6 +8,8 @@ /include/ "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/oxsemi,ox820.h> +#include <dt-bindings/reset/oxsemi,ox820.h> / { compatible = "oxsemi,ox820"; @@ -83,8 +85,8 @@ nandc: nand-controller@41000000 { compatible = "oxsemi,ox820-nand"; reg = <0x41000000 0x100000>; - clocks = <&stdclk 11>; - resets = <&reset 15>; + clocks = <&stdclk CLK_820_NAND>; + resets = <&reset RESET_NAND>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -99,9 +101,9 @@ mac-address = [000000000000]; /* Filled in by U-Boot */ phy-mode = "rgmii"; - clocks = <&stdclk 9>, <&gmacclk>; + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; + resets = <&reset RESET_MAC>; /* Regmap for sys registers */ oxsemi,sys-ctrl = <&sys>; @@ -208,7 +210,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 17>; + resets = <&reset RESET_UART1>; }; uart1: serial@300000 { @@ -222,7 +224,7 @@ no-loopback-test; status = "disabled"; clocks = <&sysclk>; - resets = <&reset 18>; + resets = <&reset RESET_UART2>; }; rps@400000 { -- 2.7.0
