This series adds an optional enable gpio to the pwm-beeper driver. This is for cases when the beeper needs to be "enabled", for example, if there is an amplifier that drives the speaker that is not always on.
David Lechner (3): Input: pwm-beeper: suppress error message on probe defer dt-bindings: Input: Add enable-gpios to pwm-beeper Input: pwm-beeper: add optional enable gpio .../devicetree/bindings/input/pwm-beeper.txt | 11 +++++++++ drivers/input/misc/pwm-beeper.c | 27 ++++++++++++++++++---- 2 files changed, 34 insertions(+), 4 deletions(-) -- 2.7.4
