Seems like Troy's email client has issues which causes his reply is unreadable in patchwork. Please ignore it in patchwork.
Regards, Yuantian > -----Original Message----- > From: Troy Jia > Sent: Thursday, January 05, 2017 10:29 AM > To: Scott Wood <[email protected]>; [email protected]; > [email protected]; Y.T. Tang <[email protected]>; > [email protected] > Cc: [email protected]; [email protected]; linux- > [email protected] > Subject: RE: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings > > > > > -----Original Message----- > > From: Scott Wood [mailto:[email protected]] > > Sent: Wednesday, January 04, 2017 6:38 PM > > To: Troy Jia <[email protected]>; [email protected]; > > [email protected]; Y.T. Tang <[email protected]>; > > [email protected] > > Cc: [email protected]; [email protected]; linux- > > [email protected] > > Subject: Re: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal > > bindings > > > > On Wed, 2017-01-04 at 16:57 +0800, Jia Hongtao wrote: > > > For different types of SoC the sensor id and endianness may vary. > > > "#thermal-sensor-cells" is used to provide sensor id information. > > > "little-endian" property is to tell the endianness of TMU. > > > > > > Signed-off-by: Jia Hongtao <[email protected]> > > > Acked-by: Rob Herring <[email protected]> > > > --- > > > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 7 > > > +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git > > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > > index 66223d5..20ca4ef 100644 > > > --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > > @@ -17,6 +17,12 @@ Required properties: > > > calibration data, as specified by the SoC reference manual. > > > The first cell of each pair is the value to be written to TTCFGR, > > > and the second is the value to be written to TSCFGR. > > > +- #thermal-sensor-cells : Must be 1. The sensor specifier is the > monitoring > > > + site ID, and represents the "n" in TRITSRn and TRATSRn. > > > > I assume the driver will continue to work with existing device trees > > where this information is absent? If so, ACK for the whole series. > > Yes. The driver works for all existing device trees. > > Thanks for the ACK. > > > > > -Scott
