The Keystone 2 boot monitor uses 32 KB of the MSM RAM @ 0x0c1f8000
on 66AK2L SoCs, so add a reserved child node for the same.
This address is aligned to the values used within the latest boot
monitor firmware [1] as of commit cf8b431e8b3b ("soc: Move load
address to end of MSMC").
[1] git://git.ti.com/processor-firmware/ks2-boot-monitor.git
Signed-off-by: Suman Anna <s-a...@ti.com>
---
arch/arm/boot/dts/keystone-k2l.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi
b/arch/arm/boot/dts/keystone-k2l.dtsi
index edc08de4e196..b58015737a35 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -210,6 +210,10 @@
ranges = <0x0 0x0c000000 0x200000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ sram-bm@1f8000 {
+ reg = <0x001f8000 0x8000>;
+ };
};
dspgpio0: keystone_dsp_gpio@02620240 {
--
2.10.2
