On 05/01/17 09:25, Benjamin Gaignard wrote:
> Timers IPs can be used to generate triggers for other IPs like
> DAC or ADC.
> Each trigger may result of timer internals signals like counter enable,
> reset or edge, this configuration could be done through "master_mode"
> device attribute.
>
> Since triggers could be used by DAC or ADC their names are defined
> in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger
> function could be used to check if the trigger is valid or not.
>
> "trgo" trigger have a "sampling_frequency" attribute which allow to configure
> timer sampling frequency.
>
> version 7:
> - remove all iio_device related code
> - move driver into trigger directory
>
> version 5:
> - simplify tables of triggers
> - only create an IIO device when needed
>
> version 4:
> - get triggers configuration from "reg" in DT
> - add tables of triggers
> - sampling frequency is enable/disable when writing in trigger
> sampling_frequency attribute
> - no more use of interruptions
>
> version 3:
> - change compatible to "st,stm32-timer-trigger"
> - fix attributes access right
> - use string instead of int for master_mode and slave_mode
> - document device attributes in sysfs-bus-iio-timer-stm32
>
> version 2:
> - keep only one compatible
> - use st,input-triggers-names and st,output-triggers-names
> to know which triggers are accepted and/or create by the device
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaign...@st.com>
One line snuck in that shouldn't be there (the one in iio/Kconfig).
Other than that
Acked-by: Jonathan Cameron <ji...@kernel.org>
I didn't get a chance to look at doing trigger trees unfortunately.
Not sure when I'll next get a window to work on new stuff.
Thanks,
Jonathan
> ---
> .../ABI/testing/sysfs-bus-iio-timer-stm32 | 29 ++
> drivers/iio/Kconfig | 1 -
> drivers/iio/trigger/Kconfig | 10 +
> drivers/iio/trigger/Makefile | 1 +
> drivers/iio/trigger/stm32-timer-trigger.c | 340
> +++++++++++++++++++++
> include/linux/iio/timer/stm32-timer-trigger.h | 62 ++++
> 6 files changed, 442 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> create mode 100644 drivers/iio/trigger/stm32-timer-trigger.c
> create mode 100644 include/linux/iio/timer/stm32-timer-trigger.h
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> new file mode 100644
> index 0000000..a7f5177
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> @@ -0,0 +1,29 @@
> +What: /sys/bus/iio/devices/triggerX/master_mode_available
> +KernelVersion: 4.10
> +Contact: benjamin.gaign...@st.com
> +Description:
> + Reading returns the list possible master modes which are:
> + - "reset" : The UG bit from the TIMx_EGR register is used
> as trigger output (TRGO).
> + - "enable" : The Counter Enable signal CNT_EN is used as
> trigger output.
> + - "update" : The update event is selected as trigger output.
> + For instance a master timer can then be used as
> a prescaler for a slave timer.
> + - "compare_pulse" : The trigger output send a positive pulse
> when the CC1IF flag is to be set.
> + - "OC1REF" : OC1REF signal is used as trigger output.
> + - "OC2REF" : OC2REF signal is used as trigger output.
> + - "OC3REF" : OC3REF signal is used as trigger output.
> + - "OC4REF" : OC4REF signal is used as trigger output.
> +
> +What: /sys/bus/iio/devices/triggerX/master_mode
> +KernelVersion: 4.10
> +Contact: benjamin.gaign...@st.com
> +Description:
> + Reading returns the current master modes.
> + Writing set the master mode
> +
> +What: /sys/bus/iio/devices/triggerX/sampling_frequency
> +KernelVersion: 4.10
> +Contact: benjamin.gaign...@st.com
> +Description:
> + Reading returns the current sampling frequency.
> + Writing an value different of 0 set and start sampling.
> + Writing 0 stop sampling.
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index a918270..6b0c427 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -92,5 +92,4 @@ source "drivers/iio/potentiostat/Kconfig"
> source "drivers/iio/pressure/Kconfig"
> source "drivers/iio/proximity/Kconfig"
> source "drivers/iio/temperature/Kconfig"
> -
Please fix this!!
> endif # IIO
> diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig
> index 809b2e7..72d3a32 100644
> --- a/drivers/iio/trigger/Kconfig
> +++ b/drivers/iio/trigger/Kconfig
> @@ -24,6 +24,16 @@ config IIO_INTERRUPT_TRIGGER
> To compile this driver as a module, choose M here: the
> module will be called iio-trig-interrupt.
>
> +config IIO_STM32_TIMER_TRIGGER
> + tristate "STM32 Timer Trigger"
> + depends on (ARCH_STM32 && OF && MFD_STM32_TIMERS) || COMPILE_TEST
> + help
> + Select this option to enable STM32 Timer Trigger
> +
> + To compile this driver as a module, choose M here: the
> + module will be called stm32-timer-trigger.
> +
> +
> config IIO_TIGHTLOOP_TRIGGER
> tristate "A kthread based hammering loop trigger"
> depends on IIO_SW_TRIGGER
> diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile
> index aab4dc2..5c4ecd3 100644
> --- a/drivers/iio/trigger/Makefile
> +++ b/drivers/iio/trigger/Makefile
> @@ -6,5 +6,6 @@
>
> obj-$(CONFIG_IIO_HRTIMER_TRIGGER) += iio-trig-hrtimer.o
> obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
> +obj-$(CONFIG_IIO_STM32_TIMER_TRIGGER) += stm32-timer-trigger.o
> obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o
> obj-$(CONFIG_IIO_TIGHTLOOP_TRIGGER) += iio-trig-loop.o
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c
> b/drivers/iio/trigger/stm32-timer-trigger.c
> new file mode 100644
> index 0000000..409fb0c
> --- /dev/null
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -0,0 +1,340 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaign...@st.com>
> + *
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/timer/stm32-timer-trigger.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/mfd/stm32-timers.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define MAX_TRIGGERS 6
> +
> +/* List the triggers created by each timer */
> +static const void *triggers_table[][MAX_TRIGGERS] = {
> + { TIM1_TRGO, TIM1_CH1, TIM1_CH2, TIM1_CH3, TIM1_CH4,},
> + { TIM2_TRGO, TIM2_CH1, TIM2_CH2, TIM2_CH3, TIM2_CH4,},
> + { TIM3_TRGO, TIM3_CH1, TIM3_CH2, TIM3_CH3, TIM3_CH4,},
> + { TIM4_TRGO, TIM4_CH1, TIM4_CH2, TIM4_CH3, TIM4_CH4,},
> + { TIM5_TRGO, TIM5_CH1, TIM5_CH2, TIM5_CH3, TIM5_CH4,},
> + { TIM6_TRGO,},
> + { TIM7_TRGO,},
> + { TIM8_TRGO, TIM8_CH1, TIM8_CH2, TIM8_CH3, TIM8_CH4,},
> + { TIM9_TRGO, TIM9_CH1, TIM9_CH2,},
> + { TIM12_TRGO, TIM12_CH1, TIM12_CH2,},
> +};
> +
> +struct stm32_timer_trigger {
> + struct device *dev;
> + struct regmap *regmap;
> + struct clk *clk;
> + u32 max_arr;
> + const void *triggers;
> +};
> +
> +static int stm32_timer_start(struct stm32_timer_trigger *priv,
> + unsigned int frequency)
> +{
> + unsigned long long prd, div;
> + int prescaler = 0;
> + u32 ccer, cr1;
> +
> + /* Period and prescaler values depends of clock rate */
> + div = (unsigned long long)clk_get_rate(priv->clk);
> +
> + do_div(div, frequency);
> +
> + prd = div;
> +
> + /*
> + * Increase prescaler value until we get a result that fit
> + * with auto reload register maximum value.
> + */
> + while (div > priv->max_arr) {
> + prescaler++;
> + div = prd;
> + do_div(div, (prescaler + 1));
> + }
> + prd = div;
> +
> + if (prescaler > MAX_TIM_PSC) {
> + dev_err(priv->dev, "prescaler exceeds the maximum value\n");
> + return -EINVAL;
> + }
> +
> + /* Check if nobody else use the timer */
> + regmap_read(priv->regmap, TIM_CCER, &ccer);
> + if (ccer & TIM_CCER_CCXE)
> + return -EBUSY;
> +
> + regmap_read(priv->regmap, TIM_CR1, &cr1);
> + if (!(cr1 & TIM_CR1_CEN))
> + clk_enable(priv->clk);
> +
> + regmap_write(priv->regmap, TIM_PSC, prescaler);
> + regmap_write(priv->regmap, TIM_ARR, prd - 1);
> + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
> +
> + /* Force master mode to update mode */
> + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0x20);
> +
> + /* Make sure that registers are updated */
> + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
> +
> + /* Enable controller */
> + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
> +
> + return 0;
> +}
> +
> +static void stm32_timer_stop(struct stm32_timer_trigger *priv)
> +{
> + u32 ccer, cr1;
> +
> + regmap_read(priv->regmap, TIM_CCER, &ccer);
> + if (ccer & TIM_CCER_CCXE)
> + return;
> +
> + regmap_read(priv->regmap, TIM_CR1, &cr1);
> + if (cr1 & TIM_CR1_CEN)
> + clk_disable(priv->clk);
> +
> + /* Stop timer */
> + regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
> + regmap_write(priv->regmap, TIM_PSC, 0);
> + regmap_write(priv->regmap, TIM_ARR, 0);
> +
> + /* Make sure that registers are updated */
> + regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
> +}
> +
> +static ssize_t stm32_tt_store_frequency(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct iio_trigger *trig = to_iio_trigger(dev);
> + struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig);
> + unsigned int freq;
> + int ret;
> +
> + ret = kstrtouint(buf, 10, &freq);
> + if (ret)
> + return ret;
> +
> + if (freq == 0) {
> + stm32_timer_stop(priv);
> + } else {
> + ret = stm32_timer_start(priv, freq);
> + if (ret)
> + return ret;
> + }
> +
> + return len;
> +}
> +
> +static ssize_t stm32_tt_read_frequency(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_trigger *trig = to_iio_trigger(dev);
> + struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig);
> + u32 psc, arr, cr1;
> + unsigned long long freq = 0;
> +
> + regmap_read(priv->regmap, TIM_CR1, &cr1);
> + regmap_read(priv->regmap, TIM_PSC, &psc);
> + regmap_read(priv->regmap, TIM_ARR, &arr);
> +
> + if (psc && arr && (cr1 & TIM_CR1_CEN)) {
> + freq = (unsigned long long)clk_get_rate(priv->clk);
> + do_div(freq, psc);
> + do_div(freq, arr);
> + }
> +
> + return sprintf(buf, "%d\n", (unsigned int)freq);
> +}
> +
> +static IIO_DEV_ATTR_SAMP_FREQ(0660,
> + stm32_tt_read_frequency,
> + stm32_tt_store_frequency);
> +
> +static char *master_mode_table[] = {
> + "reset",
> + "enable",
> + "update",
> + "compare_pulse",
> + "OC1REF",
> + "OC2REF",
> + "OC3REF",
> + "OC4REF"
> +};
> +
> +static ssize_t stm32_tt_show_master_mode(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> + u32 cr2;
> +
> + regmap_read(priv->regmap, TIM_CR2, &cr2);
> + cr2 = (cr2 & TIM_CR2_MMS) >> TIM_CR2_MMS_SHIFT;
> +
> + return snprintf(buf, PAGE_SIZE, "%s\n", master_mode_table[cr2]);
> +}
> +
> +static ssize_t stm32_tt_store_master_mode(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(master_mode_table); i++) {
> + if (!strncmp(master_mode_table[i], buf,
> + strlen(master_mode_table[i]))) {
> + regmap_update_bits(priv->regmap, TIM_CR2,
> + TIM_CR2_MMS, i << TIM_CR2_MMS_SHIFT);
> + /* Make sure that registers are updated */
> + regmap_update_bits(priv->regmap, TIM_EGR,
> + TIM_EGR_UG, TIM_EGR_UG);
> + return len;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static IIO_CONST_ATTR(master_mode_available,
> + "reset enable update compare_pulse OC1REF OC2REF OC3REF OC4REF");
> +
> +static IIO_DEVICE_ATTR(master_mode, 0660,
> + stm32_tt_show_master_mode,
> + stm32_tt_store_master_mode,
> + 0);
> +
> +static struct attribute *stm32_trigger_attrs[] = {
> + &iio_dev_attr_sampling_frequency.dev_attr.attr,
> + &iio_dev_attr_master_mode.dev_attr.attr,
> + &iio_const_attr_master_mode_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group stm32_trigger_attr_group = {
> + .attrs = stm32_trigger_attrs,
> +};
> +
> +static const struct attribute_group *stm32_trigger_attr_groups[] = {
> + &stm32_trigger_attr_group,
> + NULL,
> +};
> +
> +static const struct iio_trigger_ops timer_trigger_ops = {
> + .owner = THIS_MODULE,
> +};
> +
> +static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv)
> +{
> + int ret;
> + const char * const *cur = priv->triggers;
> +
> + while (cur && *cur) {
> + struct iio_trigger *trig;
> +
> + trig = devm_iio_trigger_alloc(priv->dev, "%s", *cur);
> + if (!trig)
> + return -ENOMEM;
> +
> + trig->dev.parent = priv->dev->parent;
> + trig->ops = &timer_trigger_ops;
> +
> + /*
> + * sampling frequency and master mode attributes
> + * should only be available on trgo trigger which
> + * is always the first in the list.
> + */
> + if (cur == priv->triggers)
> + trig->dev.groups = stm32_trigger_attr_groups;
> +
> + iio_trigger_set_drvdata(trig, priv);
> +
> + ret = devm_iio_trigger_register(priv->dev, trig);
> + if (ret)
> + return ret;
> + cur++;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * is_stm32_timer_trigger
> + * @trig: trigger to be checked
> + *
> + * return true if the trigger is a valid stm32 iio timer trigger
> + * either return false
> + */
> +bool is_stm32_timer_trigger(struct iio_trigger *trig)
> +{
> + return (trig->ops == &timer_trigger_ops);
> +}
> +EXPORT_SYMBOL(is_stm32_timer_trigger);
> +
> +static int stm32_timer_trigger_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct stm32_timer_trigger *priv;
> + struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
> + unsigned int index;
> + int ret;
> +
> + if (of_property_read_u32(dev->of_node, "reg", &index))
> + return -EINVAL;
> +
> + if (index >= ARRAY_SIZE(triggers_table))
> + return -EINVAL;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + priv->regmap = ddata->regmap;
> + priv->clk = ddata->clk;
> + priv->max_arr = ddata->max_arr;
> + priv->triggers = triggers_table[index];
> +
> + ret = stm32_setup_iio_triggers(priv);
> + if (ret)
> + return ret;
> +
> + platform_set_drvdata(pdev, priv);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_trig_of_match[] = {
> + { .compatible = "st,stm32-timer-trigger", },
> + { /* end node */ },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_trig_of_match);
> +
> +static struct platform_driver stm32_timer_trigger_driver = {
> + .probe = stm32_timer_trigger_probe,
> + .driver = {
> + .name = "stm32-timer-trigger",
> + .of_match_table = stm32_trig_of_match,
> + },
> +};
> +module_platform_driver(stm32_timer_trigger_driver);
> +
> +MODULE_ALIAS("platform: stm32-timer-trigger");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 Timer Trigger driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/iio/timer/stm32-timer-trigger.h
> b/include/linux/iio/timer/stm32-timer-trigger.h
> new file mode 100644
> index 0000000..55535ae
> --- /dev/null
> +++ b/include/linux/iio/timer/stm32-timer-trigger.h
> @@ -0,0 +1,62 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaign...@st.com>
> + *
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#ifndef _STM32_TIMER_TRIGGER_H_
> +#define _STM32_TIMER_TRIGGER_H_
> +
> +#define TIM1_TRGO "tim1_trgo"
> +#define TIM1_CH1 "tim1_ch1"
> +#define TIM1_CH2 "tim1_ch2"
> +#define TIM1_CH3 "tim1_ch3"
> +#define TIM1_CH4 "tim1_ch4"
> +
> +#define TIM2_TRGO "tim2_trgo"
> +#define TIM2_CH1 "tim2_ch1"
> +#define TIM2_CH2 "tim2_ch2"
> +#define TIM2_CH3 "tim2_ch3"
> +#define TIM2_CH4 "tim2_ch4"
> +
> +#define TIM3_TRGO "tim3_trgo"
> +#define TIM3_CH1 "tim3_ch1"
> +#define TIM3_CH2 "tim3_ch2"
> +#define TIM3_CH3 "tim3_ch3"
> +#define TIM3_CH4 "tim3_ch4"
> +
> +#define TIM4_TRGO "tim4_trgo"
> +#define TIM4_CH1 "tim4_ch1"
> +#define TIM4_CH2 "tim4_ch2"
> +#define TIM4_CH3 "tim4_ch3"
> +#define TIM4_CH4 "tim4_ch4"
> +
> +#define TIM5_TRGO "tim5_trgo"
> +#define TIM5_CH1 "tim5_ch1"
> +#define TIM5_CH2 "tim5_ch2"
> +#define TIM5_CH3 "tim5_ch3"
> +#define TIM5_CH4 "tim5_ch4"
> +
> +#define TIM6_TRGO "tim6_trgo"
> +
> +#define TIM7_TRGO "tim7_trgo"
> +
> +#define TIM8_TRGO "tim8_trgo"
> +#define TIM8_CH1 "tim8_ch1"
> +#define TIM8_CH2 "tim8_ch2"
> +#define TIM8_CH3 "tim8_ch3"
> +#define TIM8_CH4 "tim8_ch4"
> +
> +#define TIM9_TRGO "tim9_trgo"
> +#define TIM9_CH1 "tim9_ch1"
> +#define TIM9_CH2 "tim9_ch2"
> +
> +#define TIM12_TRGO "tim12_trgo"
> +#define TIM12_CH1 "tim12_ch1"
> +#define TIM12_CH2 "tim12_ch2"
> +
> +bool is_stm32_timer_trigger(struct iio_trigger *trig);
> +
> +#endif
>
