On 09/01/17 16:46, Maxime Ripard wrote:
> The A64 only has a single set of pins for each MMC controller. Since we
> already have boards that require all of them, let's add them to the DTSI.
This matches my reworked version from the previous series, so:
Reviewed-by: Andre Przywara <andre.przyw...@arm.com>
Cheers,
Andre.
>
> Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 ++++++++++++++++++++-
> 1 file changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 143e9706438f..8e149498e096 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -205,6 +205,31 @@
> function = "i2c1";
> };
>
> + mmc0_pins: mmc0-pins {
> + pins = "PF0", "PF1", "PF2", "PF3",
> + "PF4", "PF5";
> + function = "mmc0";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc1_pins: mmc1-pins {
> + pins = "PG0", "PG1", "PG2", "PG3",
> + "PG4", "PG5";
> + function = "mmc1";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> + mmc2_pins: mmc2-pins {
> + pins = "PC1", "PC5", "PC6", "PC8", "PC9",
> + "PC10","PC11", "PC12", "PC13",
> + "PC14", "PC15", "PC16";
> + function = "mmc2";
> + drive-strength = <30>;
> + bias-pull-up;
> + };
> +
> uart0_pins_a: uart0@0 {
> pins = "PB8", "PB9";
> function = "uart0";
>
