From: "Ivan T. Ivanov" <[email protected]> Add initial set of CoreSight components found on Qualcomm apq8064 based platforms, including the IFC6410 board.
Signed-off-by: Ivan T. Ivanov <[email protected]> Acked-by: Mathieu Poirier <[email protected]> Signed-off-by: Georgi Djakov <[email protected]> --- Changes since v2 (https://lkml.org/lkml/2016/11/21/522) * Rebase to linux-next Changes since v1 (https://lkml.org/lkml/2016/11/17/474) * Moved everything into the SoC dtsi file as suggested by Stephen Boyd. * Updated commit message. * Got Ack from Mathieu. arch/arm/boot/dts/qcom-apq8064.dtsi | 189 +++++++++++++++++++++++++++++++++++- 1 file changed, 185 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 407a4610f4a7..4b77075ef731 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -28,7 +28,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -39,7 +39,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -50,7 +50,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -61,7 +61,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -1420,6 +1420,187 @@ }; }; }; + + etb@1a01000 { + compatible = "coresight-etb10", "arm,primecell"; + reg = <0x1a01000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + tpiu@1a03000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x1a03000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&funnel_out>; + }; + }; + }; + }; + + funnel@1a04000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x1a04000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 2 - connected to STM component + * 3 - not-connected + * 6 - not-connected + * 7 - not-connected + */ + port@0 { + reg = <0>; + funnel_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@4 { + reg = <4>; + funnel_in4: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@5 { + reg = <5>; + funnel_in5: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + funnel_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etm@1a1c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; + }; + }; + + etm@1a1d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; + }; + }; + + etm@1a1e000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; + }; + }; + + etm@1a1f000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x1a1f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; + }; + }; }; }; #include "qcom-apq8064-pins.dtsi"
