This patch adds support to toggle mute on 'line-out' pin on Dell Edge
IoT Gateways. A dedicated GPIO on the SoC is used to control the amplifier.
This GPIO is described in the BIOS DSD table.

Signed-off-by: Shrirang Bagul <[email protected]>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c 
b/sound/soc/intel/boards/bytcr_rt5640.c
index e8c9a01..ae53a29 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
 #include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/dmi.h>
@@ -74,6 +75,7 @@ struct byt_acpi_card {
 
 struct byt_rt5640_private {
        struct byt_acpi_card *acpi_card;
+       struct gpio_desc *gpio_lo_mute;
        struct clk *mclk;
        char codec_name[16];
        int *clks;
@@ -198,6 +200,19 @@ static int platform_clock_control(struct 
snd_soc_dapm_widget *w,
        return 0;
 }
 
+static int byt_rt5660_event_lineout(struct snd_soc_dapm_widget *w,
+                       struct snd_kcontrol *k, int event)
+{
+       struct snd_soc_dapm_context *dapm = w->dapm;
+       struct snd_soc_card *card = dapm->card;
+       struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+
+       gpiod_set_value_cansleep(priv->gpio_lo_mute,
+                       !(SND_SOC_DAPM_EVENT_ON(event)));
+
+       return 0;
+}
+
 static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
        SND_SOC_DAPM_HP("Headphone", NULL),
        SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -296,7 +311,7 @@ static const struct snd_kcontrol_new byt_rt5640_controls[] 
= {
 
 static const struct snd_soc_dapm_widget byt_rt5660_widgets[] = {
        SND_SOC_DAPM_MIC("Line In", NULL),
-       SND_SOC_DAPM_LINE("Line Out", NULL),
+       SND_SOC_DAPM_LINE("Line Out", byt_rt5660_event_lineout),
        SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
                        platform_clock_control, SND_SOC_DAPM_PRE_PMU |
                        SND_SOC_DAPM_POST_PMD),
@@ -562,7 +577,18 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime 
*runtime)
 static int byt_rt5660_init(struct snd_soc_pcm_runtime *runtime)
 {
        int ret;
+       struct snd_soc_codec *codec = runtime->codec;
        struct snd_soc_card *card = runtime->card;
+       struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+
+       /* Request rt5660 GPIO for lineout mute control */
+       priv->gpio_lo_mute = devm_gpiod_get_index(codec->dev,
+                       "lineout-mute", 0, 0);
+       if (IS_ERR(priv->gpio_lo_mute)) {
+               dev_err(card->dev, "Can't find GPIO_MUTE# gpio\n");
+               return PTR_ERR(priv->gpio_lo_mute);
+       }
+       gpiod_direction_output(priv->gpio_lo_mute, 1);
 
        ret = snd_soc_dapm_add_routes(&card->dapm,
                        byt_rt5640_ssp2_aif1_map,
-- 
2.9.3

Reply via email to