Hi,
On Sat, 2017-01-14 at 15:05 +0800, Baoyou Xie wrote:
> This patch adds dt-binding documentation for zx2967 family
> reset controller.
>
> Signed-off-by: Baoyou Xie <baoyou....@linaro.org>
> ---
> .../devicetree/bindings/reset/zte,zx2967-reset.txt | 20
> ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> new file mode 100644
> index 0000000..22d590e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
> @@ -0,0 +1,20 @@
> +ZTE zx2967 SoCs Reset Controller
> +=======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: should be one of the following.
> + * zte,zx296718-reset
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #reset-cells: must be 1.
> +
> +example:
> +
> + toprst: reset@1461060 {
That node should be named reset-controller.
> + compatible = "zte,zx296718-reset";
> + reg = <0x01461060 0x8>;
> + #reset-cells = <1>;
> + };
regards
Philipp
