[PATCH 08/13] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers

[Paul Cercueil]

We set the pin configuration for the jz4780-nand and jz4780-uart
drivers.

Signed-off-by: Paul Cercueil <p...@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts 
b/arch/mips/boot/dts/ingenic/ci20.dts
index 1652d8d60b1e..e2cd3ebb7be8 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -29,18 +29,30 @@
 
 &uart0 {
        status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_uart0_data>;
 };
 
 &uart1 {
        status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_uart1_data>;
 };
 
 &uart3 {
        status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_uart2_dataplusflow>;
 };
 
 &uart4 {
        status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_uart4_data>;
 };
 
 &nemc {
@@ -61,6 +73,16 @@
                ingenic,nemc-tAW = <15>;
                ingenic,nemc-tSTRV = <100>;
 
+               /*
+                * Only CLE/ALE are needed for the devices that are connected, 
rather
+                * than the full address line set.
+                */
+               pinctrl-names = "default";
+               pinctrl-0 = <&pins_nemc_data
+                                &pins_nemc_cle_ale
+                                &pins_nemc_rd_we
+                                &pins_nemc_frd_fwe>;
+
                nand@1 {
                        reg = <1>;
 
@@ -69,6 +91,9 @@
                        nand-ecc-mode = "hw";
                        nand-on-flash-bbt;
 
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pins_nemc_cs1>;
+
                        partitions {
                                compatible = "fixed-partitions";
                                #address-cells = <2>;
-- 
2.11.0