Philip Langdale wrote:
> Clean up the handling of low voltage MMC cards.
>
>
> The latest MMC and SD specs both agree that the low
> voltage range is defined as 1.65-1.95V and is signified
> by bit 7 in the OCR. An old Sandisk spec implied that
> bits 7-0 represented voltages below 2.0V in 1V increments,
> and the code was accordingly written with that expectation.
>
>
We must not have the same specs. My simplified SD 2.0 physical spec
defines everything below bit 15 as reserved.
> This change switches the code to conform to the specs and
> fixes the SDHCI driver. It also removes the explicit
> defines for the host vdd and updates the SDHCI driver
> to convert the bit number back to the mask value
> for comparisons. Having only a single set of defines
> ensures there's nothing to get out of sync.
>
>
Although this is a nice change, it confuses things to have two changes
in one commit. Could you split them up and base it on my "for-andrew"
branch?
Rgds
--
-- Pierre Ossman
Linux kernel, MMC maintainer http://www.kernel.org
PulseAudio, core developer http://pulseaudio.org
rdesktop, core developer http://www.rdesktop.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
