Driver processes the event MPI26_EVENT_ACTIVE_CABLE_DEGRADED
when a cable is present and is running at a degraded speed
(below the SAS3 12 Gb/s rate). Prints added
to inform the user that the cable is not running at
optimal speed.
Signed-off-by: Chaitra P B <chaitra.basa...@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subram...@broadcom.com>
---
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2 ++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 20 ++++++++++++++------
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 8bae305..af4be40 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -624,6 +624,8 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
/* defines for ReasonCode field */
#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
+#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
+#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
/*Hard Reset Received Event data */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 75f3fce..0f71f4a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -8028,15 +8028,23 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER
*ioc, u8 msix_index,
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
ActiveCableEventData =
(Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
- if (ActiveCableEventData->ReasonCode ==
- MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
- pr_info(MPT3SAS_FMT "Currently an active cable with
ReceptacleID %d",
+ switch (ActiveCableEventData->ReasonCode) {
+ case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
+ pr_info(MPT3SAS_FMT "Currently an active cable with
ReceptacleID %d\n",
ioc->name, ActiveCableEventData->ReceptacleID);
- pr_info("cannot be powered and devices connected to
this active cable");
- pr_info("will not be seen. This active cable");
- pr_info("requires %d mW of power",
+ pr_info(" cannot be powered and devices connected
to\n");
+ pr_info(" this active cable will not be seen. This\n");
+ pr_info(" cable requires %d mW of power\n",
ActiveCableEventData->ActiveCablePowerRequirement);
+ break;
+
+ case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
+ pr_info(MPT3SAS_FMT "Currently a cable with
ReceptacleID %d",
+ ioc->name, ActiveCableEventData->ReceptacleID);
+ pr_info(" is not running at optimal speed(12 Gb/s)\n");
+ break;
}
+
break;
default: /* ignore the rest */
--
1.7.1
