phy_attach_direct() ignores errors returned by
phy_led_triggers_register(). I think that's OK, as LED triggers can be
considered a non-critical feature.
However, this causes problems later:
- phy_led_trigger_change_speed() will access the array
phy_device.phy_led_triggers, which has been freed in the error path
of phy_led_triggers_register(), which may lead to a crash.
- phy_led_triggers_unregister() will access the same array, leading to
crashes during s2ram or poweroff, like:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
...
[<c04116d4>] (__list_del_entry_valid) from [<c05e8948>]
(led_trigger_unregister+0x34/0xcc)
[<c05e8948>] (led_trigger_unregister) from [<c05336c4>]
(phy_led_triggers_unregister+0x28/0x34)
[<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>]
(phy_detach+0x30/0x74)
[<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c)
[<c0538bdc>] (sh_eth_close) from [<c04d4ce0>]
(dpm_run_callback+0x48/0xc8)
or:
list_del corruption. prev->next should be dede6540, but was 2e323931
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:52!
...
[<c02f6d70>] (__list_del_entry_valid) from [<c0425168>]
(led_trigger_unregister+0x34/0xcc)
[<c0425168>] (led_trigger_unregister) from [<c03a05a0>]
(phy_led_triggers_unregister+0x28/0x34)
[<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>]
(phy_detach+0x30/0x74)
[<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4)
[<c03a4fc0>] (sh_eth_close) from [<c0483234>]
(__dev_close_many+0xac/0xd0)
To fix this, clear phy_device.phy_num_led_triggers in the error path of
phy_led_triggers_register() fails.
Note that the "No phy led trigger registered for speed" message will
still be printed on link speed changes, which is a good cue that
something went wrong with the LED triggers.
Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy
link state change")
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
Alternatively, phy_attach_direct() could consider
phy_led_triggers_register() failures as fatal, so
phy_led_trigger_change_speed() and phy_led_triggers_unregister() are
never called afterwards.
Exposed by commit 4567d686f5c6d955 ("phy: increase size of
MII_BUS_ID_SIZE and bus_id"), which caused duplicate trigger names.
---
drivers/net/phy/phy_led_triggers.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phy_led_triggers.c
b/drivers/net/phy/phy_led_triggers.c
index fa62bdf2f52694de..3f619e7371e97d8a 100644
--- a/drivers/net/phy/phy_led_triggers.c
+++ b/drivers/net/phy/phy_led_triggers.c
@@ -102,8 +102,10 @@ int phy_led_triggers_register(struct phy_device *phy)
sizeof(struct phy_led_trigger) *
phy->phy_num_led_triggers,
GFP_KERNEL);
- if (!phy->phy_led_triggers)
- return -ENOMEM;
+ if (!phy->phy_led_triggers) {
+ err = -ENOMEM;
+ goto out_clear;
+ }
for (i = 0; i < phy->phy_num_led_triggers; i++) {
err = phy_led_trigger_register(phy, &phy->phy_led_triggers[i],
@@ -120,6 +122,8 @@ int phy_led_triggers_register(struct phy_device *phy)
while (i--)
phy_led_trigger_unregister(&phy->phy_led_triggers[i]);
devm_kfree(&phy->mdio.dev, phy->phy_led_triggers);
+out_clear:
+ phy->phy_num_led_triggers = 0;
return err;
}
EXPORT_SYMBOL_GPL(phy_led_triggers_register);
--
1.9.1
