This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6, COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The list of supported products in the module description is also updated.
Signed-off-by: Michael Brunner <michael.brun...@kontron.com> Acked-by: Christian Rauch <christian.ra...@kontron.com> --- drivers/mfd/Kconfig | 5 +++++ drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4ce3b6f..5394125 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -506,17 +506,22 @@ config MFD_KEMPLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: + * COMe-bBD# * COMe-bBL6 * COMe-bHL6 + * COMe-bSL6 * COMe-bIP# + * COMe-bKL6 * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) + * COMe-cAL6 * COMe-cBL6 * COMe-cBT6 * COMe-cBW6 * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cHL6 + * COMe-cKL6 * COMe-cPC2 (microETXexpress-PC) * COMe-cSL6 * COMe-mAL10 diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index da5722d..895f655 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = { static struct dmi_system_id kempld_dmi_table[] __initdata = { { + .ident = "BBD6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "BBL6", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), @@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "BKL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BSL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CAL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "CBL6", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), @@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = { .driver_data = (void *)&kempld_platform_data_generic, .callback = kempld_create_platform_device, }, { + .ident = "CKL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { .ident = "CNTG", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), -- 2.7.4