Le 18/08/2016 à 09:37, Yunhui Cui a écrit :
> We can get the read/write/erase opcode from the spi nor framework
> directly. This patch uses the information stored in the SPI-NOR to
> remove the hardcode in the fsl_qspi_init_lut().
>
> Signed-off-by: Yunhui Cui <[email protected]>
> Signed-off-by: Yunhui Cui <[email protected]>
Applied to the spi-nor tree
Thanks!
> ---
> drivers/mtd/spi-nor/fsl-quadspi.c | 40
> ++++++++++++---------------------------
> 1 file changed, 12 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c
> b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 5c82e4e..5ad6402 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -373,9 +373,13 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> void __iomem *base = q->iobase;
> int rxfifo = q->devtype_data->rxfifo;
> u32 lut_base;
> - u8 cmd, addrlen, dummy;
> int i;
>
> + struct spi_nor *nor = &q->nor[0];
> + u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
> + u8 read_op = nor->read_opcode;
> + u8 read_dm = nor->read_dummy;
> +
> fsl_qspi_unlock_lut(q);
>
> /* Clear all the LUT table */
> @@ -385,20 +389,10 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> /* Quad Read */
> lut_base = SEQID_QUAD_READ * 4;
>
> - if (q->nor_size <= SZ_16M) {
> - cmd = SPINOR_OP_READ_1_1_4;
> - addrlen = ADDR24BIT;
> - dummy = 8;
> - } else {
> - /* use the 4-byte address */
> - cmd = SPINOR_OP_READ_1_1_4;
> - addrlen = ADDR32BIT;
> - dummy = 8;
> - }
> -
> - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
> + qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
> base + QUADSPI_LUT(lut_base));
> - qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
> + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
> + LUT1(FSL_READ, PAD4, rxfifo),
> base + QUADSPI_LUT(lut_base + 1));
>
> /* Write enable */
> @@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> /* Page Program */
> lut_base = SEQID_PP * 4;
>
> - if (q->nor_size <= SZ_16M) {
> - cmd = SPINOR_OP_PP;
> - addrlen = ADDR24BIT;
> - } else {
> - /* use the 4-byte address */
> - cmd = SPINOR_OP_PP;
> - addrlen = ADDR32BIT;
> - }
> -
> - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
> + qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
> + LUT1(ADDR, PAD1, addrlen),
> base + QUADSPI_LUT(lut_base));
> qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
> base + QUADSPI_LUT(lut_base + 1));
> @@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
> /* Erase a sector */
> lut_base = SEQID_SE * 4;
>
> - cmd = q->nor[0].erase_opcode;
> - addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
> -
> - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
> + qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
> + LUT1(ADDR, PAD1, addrlen),
> base + QUADSPI_LUT(lut_base));
>
> /* Erase the whole chip */
>
