The Broadcom Northstar2 SoC has a number of quirks for the PAXC
(internal/fake) PCI bus. Specifically, the PCI config space is shared
between the root port and the first PF (ie., PF0), and a number of
fields are tied to zero (thus preventing them from being set). These
cannot be "fixed" in device firmware, so we must fix them with a quirk.
Signed-off-by: Jon Mason <jon.ma...@broadcom.com>
---
drivers/pci/quirks.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1800bef..c5ef20a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2239,6 +2239,27 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
PCI_DEVICE_ID_TIGON3_5719,
quirk_brcm_5719_limit_mrrs);
+#ifdef CONFIG_PCIE_IPROC_PLATFORM
+static void quirk_paxc_bridge(struct pci_dev *pdev)
+{
+ /* The PCI config space is shared with the PAXC root port and the first
+ * Ethernet device. So, we need to workaround this by telling the PCI
+ * code that the bridge is not an Ethernet device.
+ */
+ if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
+
+ /* MPSS is not being set properly (as it is currently 0). This is
+ * because that area of the PCI config space is hard coded to zero, and
+ * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS)
+ * so that the MPS can be set to the real max value.
+ */
+ pdev->pcie_mpss = 2;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
+#endif
+
/* Originally in EDAC sources for i82875P:
* Intel tells BIOS developers to hide device 6 which
* configures the overflow device access containing
--
2.7.4
