Hi Lee On 01/27/2017 06:28 PM, Lee Jones wrote: > Having just defined some new Pinctrl groups for when when HW flow-
double "when" > control is {en,dis}abled, let's reference them for use within the > driver. > > Signed-off-by: Lee Jones <lee.jo...@linaro.org> > --- > arch/arm/boot/dts/stih407-family.dtsi | 3 +-- > arch/arm/boot/dts/stih410-b2260.dts | 5 ++++- > 2 files changed, 5 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/stih407-family.dtsi > b/arch/arm/boot/dts/stih407-family.dtsi > index c8b2944..e480e32 100644 > --- a/arch/arm/boot/dts/stih407-family.dtsi > +++ b/arch/arm/boot/dts/stih407-family.dtsi > @@ -222,9 +222,8 @@ > compatible = "st,asc"; > reg = <0x9830000 0x2c>; > interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_serial0>; > clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; > + /* Pinctrl moved out to a per-board configuration */ > > status = "disabled"; > }; > diff --git a/arch/arm/boot/dts/stih410-b2260.dts > b/arch/arm/boot/dts/stih410-b2260.dts > index fa16aba..8deecf6 100644 > --- a/arch/arm/boot/dts/stih410-b2260.dts > +++ b/arch/arm/boot/dts/stih410-b2260.dts > @@ -62,8 +62,11 @@ > /* Low speed expansion connector */ > uart0: serial@9830000 { > label = "LS-UART0"; > - status = "okay"; > + pinctrl-names = "default", "manual-rts"; > + pinctrl-0 = <&pinctrl_serial0_flowctrl>; > + pinctrl-1 = <&pinctrl_serial0>; > rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; > + status = "okay"; > }; > > /* Low speed expansion connector */ >