On 1/31/2017 11:23 AM, Joao Pinto wrote:
Hi Peppe,
Às 10:00 AM de 1/31/2017, Giuseppe CAVALLARO escreveu:
Hello Corentin
On 1/31/2017 10:11 AM, Corentin Labbe wrote:
Hello
I am currently working on dwmac-sun8i glue driver for Allwinner H3/A83T/A64.
This serie is the result of all minor problem found in the stmmac driver.
thank for this effort, many changes are to tidy up some part of the code
so I wonder if these should stay on top of net-next.
There is on-going a thread to change something in the stmmac (where I
missed more details and I tried to refresh all asap); so added on copy
Joao.
I submitted 2 suggestions that would rename folder stmicro to dwc and dwmac4*
files to eqos. The second one is important, since there is no dwmc4/gmac4 core,
in fact it is called eqos that will have 5.00 version very soon. Both
suggestions were rejected and so I turned to developing features.
I am available to discuss with you any improvement on these aspects if you think
it makes sense.
Currently I am developing the support for multi-queues / multi-channels which
will enable in the future stmmac to be used in QAv and TSN applications.
this is a really good point, so I am happy that you are looking for this
supports that can stay on high priority and do not generate conflicts
with this patch series.
We will reopen the renaming story later... I hope to be more reactive
on that and sorry for my absence.
Regards
Peppe
Thanks,
Joao
I will give you my feedback on some patches too.
peppe
Regards
Corentin Labbe (17):
net: stmmac: fix the typo on MAC_RNABLE_RX
net: stmmac: Remove the bus_setup function pointer
net: stmmac: fix some typos in comments
net: stmmac: remove freesoftware address
net: stmmac: remplace asm/io.h by linux/io.h
net: stmmac: fix some code style problem
net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeout
net: stmmac: Use readl_poll_timeout
net: stmmac: replace ENOSYS by EINVAL
net: stmmac: Correct the error message about invalid speed
net: stmmac: Rewrite two test against NULL value
net: stmmac: rename rx_crc to rx_crc_errors
net: stmmac: Implement NAPI for TX
net: stmmac: print phy information
net: stmmac: remove dead code in stmmac_tx_clean
net: stmmac: remove unused variable in sysfs_display_ring
net: stmmac: replace unsigned by u32
drivers/net/ethernet/stmicro/stmmac/chain_mode.c | 4 --
drivers/net/ethernet/stmicro/stmmac/common.h | 8 +--
drivers/net/ethernet/stmicro/stmmac/descs.h | 4 --
drivers/net/ethernet/stmicro/stmmac/descs_com.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac100.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 4 --
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 4 --
.../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 --
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 4 --
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 28 ++++------
drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/mmc.h | 4 --
drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 --
drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 4 --
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 6 +--
.../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 63 ++++++++++------------
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 52 +++++++-----------
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 --
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 --
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 4 --
include/linux/stmmac.h | 1 -
28 files changed, 65 insertions(+), 185 deletions(-)
