On Sat, Feb 04, 2017 at 04:30:02PM -0800, Cameron Gutman wrote:
> The Xbox One S requires an ack to its mode button report
> otherwise it continuously retransmits the report. This
> makes the mode button appear to be stuck down after it
> is pressed for the first time.
> 
> Signed-off-by: Cameron Gutman <[email protected]>

Applied, thank you.

> ---
>  drivers/input/joystick/xpad.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
> index 1179266..eb01c54 100644
> --- a/drivers/input/joystick/xpad.c
> +++ b/drivers/input/joystick/xpad.c
> @@ -414,6 +414,7 @@ struct usb_xpad {
>  
>  static int xpad_init_input(struct usb_xpad *xpad);
>  static void xpad_deinit_input(struct usb_xpad *xpad);
> +static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
>  
>  /*
>   *   xpad_process_packet
> @@ -647,6 +648,14 @@ static void xpadone_process_packet(struct usb_xpad 
> *xpad, u16 cmd, unsigned char
>  
>       /* the xbox button has its own special report */
>       if (data[0] == 0X07) {
> +             /*
> +              * The Xbox One S controller requires these reports to be
> +              * acked otherwise it continues sending them forever and
> +              * won't report further mode button events.
> +              */
> +             if (data[1] == 0x30)
> +                     xpadone_ack_mode_report(xpad, data[2]);
> +
>               input_report_key(dev, BTN_MODE, data[4] & 0x01);
>               input_sync(dev);
>               return;
> @@ -983,6 +992,30 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad)
>       return retval;
>  }
>  
> +static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
> +{
> +     unsigned long flags;
> +     struct xpad_output_packet *packet =
> +                     &xpad->out_packets[XPAD_OUT_CMD_IDX];
> +     static const u8 mode_report_ack[] = {
> +             0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
> +             0x00, 0x00, 0x00, 0x00, 0x00
> +     };
> +
> +     spin_lock_irqsave(&xpad->odata_lock, flags);
> +
> +     packet->len = sizeof(mode_report_ack);
> +     memcpy(packet->data, mode_report_ack, packet->len);
> +     packet->data[2] = seq_num;
> +     packet->pending = true;
> +
> +     /* Reset the sequence so we send out the ack now */
> +     xpad->last_out_packet = -1;
> +     xpad_try_sending_next_out_packet(xpad);
> +
> +     spin_unlock_irqrestore(&xpad->odata_lock, flags);
> +}
> +
>  #ifdef CONFIG_JOYSTICK_XPAD_FF
>  static int xpad_play_effect(struct input_dev *dev, void *data, struct 
> ff_effect *effect)
>  {
> -- 
> 2.9.3
> 

-- 
Dmitry

Reply via email to