The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the
TPS65086 PMIC")
Reported-by: Steven Kipisz <[email protected]>
Signed-off-by: Andrew F. Davis <[email protected]>
Tested-by: Steven Kipisz <[email protected]>
---
drivers/regulator/tps65086-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/tps65086-regulator.c
b/drivers/regulator/tps65086-regulator.c
index ecb0371780af..84e8cb109269 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -157,8 +157,8 @@ static struct tps65086_regulator regulators[] = {
VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
tps65086_ldoa23_ranges, 0, 0),
TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
- TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
- TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+ TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+ TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
--
2.11.0
