Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy....@rock-chips.com>
---
.../{rockchip,rk1108-cru.txt => rockchip,rv1108-cru.txt} | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
rename Documentation/devicetree/bindings/clock/{rockchip,rk1108-cru.txt =>
rockchip,rv1108-cru.txt} (83%)
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
similarity index 83%
rename from Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
rename to Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
index 4da1261..161326a 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
@@ -1,12 +1,12 @@
-* Rockchip RK1108 Clock and Reset Unit
+* Rockchip RV1108 Clock and Reset Unit
-The RK1108 clock controller generates and supplies clock to various
+The RV1108 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
Required Properties:
-- compatible: should be "rockchip,rk1108-cru"
+- compatible: should be "rockchip,rv1108-cru"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
@@ -19,7 +19,7 @@ Optional Properties:
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be
+preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
used in device tree sources. Similar macros exist for the reset sources in
these files.
@@ -38,7 +38,7 @@ clock-output-names:
Example: Clock controller node:
cru: cru@20200000 {
- compatible = "rockchip,rk1108-cru";
+ compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
rockchip,grf = <&grf>;
@@ -50,7 +50,7 @@ Example: UART controller node that consumes the clock
generated by the clock
controller:
uart0: serial@10230000 {
- compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+ compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10230000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
--
2.7.4
