Signed-off-by: Mariusz Bialonczyk <ma...@skyboo.net> --- Documentation/w1/slaves/w1_therm | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index d1f93af..e10cd91 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -42,6 +42,7 @@ SRAM, so it is reset when the sensor gets power-cycled. To store the current precision configuration into EEPROM, the value 0 has to be written to the sysfs w1_slave file. Since the EEPROM has a limited amount of writes (>50k), this command should be used wisely. +Note: this precision value has to be a binary one-byte value, not ASCII. The module parameter strong_pullup can be set to 0 to disable the strong pullup, 1 to enable autodetection or 2 to force strong pullup. -- 2.9.3