On Fri, 2017-02-17 at 14:53 +0530, Rajneesh Bhardwaj wrote:
> This patch uses crystal frequency based on the cpu model.
>
> On Apollo Lake SoC we have 19.2 MHz clock frequency for counting S0ix
> residency but this clock frequency might change on future platforms
> depending on the crystal oscillator.
I don't see any "future platforms" in the kernel right now, so, it's not
for this cycle apparently.
Now, let me do a review.
> @@ -61,11 +62,11 @@
> #define GCR_TELEM_DEEP_S0IX_OFFSET 0x1078
> #define GCR_TELEM_SHLW_S0IX_OFFSET 0x1080
>
> -/* Residency with clock rate at 19.2MHz to usecs */
> -#define S0IX_RESIDENCY_IN_USECS(d, s) \
> +/* Convert S0ix residency to usecs based on XTAL frequency */
> +#define S0IX_RESIDENCY_IN_USECS(d, s, x) \
> ({ \
> - u64 result = 10ull * ((d) + (s)); \
> - do_div(result, 192); \
> + u64 result = 1000ull * ((d) + (s)); \
> + do_div(result, x); \
You forgot parens.
> result; \
> })
>
> @@ -131,6 +132,7 @@
> resource_size_t gcr_base;
> int gcr_size;
> bool has_gcr_regs;
> + u32 xtal_khz;
Reverse Xmas tree order.
>
> /* punit */
> struct platform_device *punit_dev;
> @@ -201,6 +203,18 @@ static inline u64 gcr_data_readq(u32 offset)
> return readq(ipcdev.ipc_base + offset);
> }
>
> +static int get_xtal_clock_freq(void)
> +{
> + switch (boot_cpu_data.x86_model) {
> + case INTEL_FAM6_ATOM_GOLDMONT:
> + ipcdev.xtal_khz = 19200;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
No. Use x86_match_id().
> static int intel_pmc_ipc_check_status(void)
> {
> int status;
> @@ -787,7 +801,7 @@ int intel_pmc_s0ix_counter_read(u64 *data)
> deep = gcr_data_readq(GCR_TELEM_DEEP_S0IX_OFFSET);
> shlw = gcr_data_readq(GCR_TELEM_SHLW_S0IX_OFFSET);
>
> - *data = S0IX_RESIDENCY_IN_USECS(deep, shlw);
> + *data = S0IX_RESIDENCY_IN_USECS(deep, shlw, ipcdev.xtal_khz);
No.
Please, as I said earlier, start investing time into cleaning up the
stuff.
1. No more "ipcdev." use.
2. Split library part from scu_ipc and this driver to something like
intel_ipc_lib.c
> return 0;
> }
> @@ -835,6 +849,12 @@ static int ipc_plat_probe(struct platform_device
> *pdev)
> goto err_irq;
> }
>
> + ret = get_xtal_clock_freq();
x86_match_id()
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to get XTAL freq\n");
> + goto err_sys;
> + }
> +
> ret = sysfs_create_group(&pdev->dev.kobj, &intel_ipc_group);
> if (ret) {
> dev_err(&pdev->dev, "Failed to create sysfs group
> %d\n",
--
Andy Shevchenko <andriy.shevche...@linux.intel.com>
Intel Finland Oy
