Hi Jose,
On Friday 03 Mar 2017 10:05:36 Jose Abreu wrote:
> On 03-03-2017 09:07, Neil Armstrong wrote:
> > The problem is that the HPD/RxSense is tied to this phy_mask and glued
> > into the dw-hdmi driver.
> >
> > The *real* solution would be to completely separate the HPD/RxSense irq
> > handling to a separate driver as a shared irq...
> >
> > If Jose is willing to give me some documentation and Freescale some
> > boards, I'll be happy to do it !
>
> Hmm, why don't get rid of phy_mask totally and just return the
> new mask in update_hpd() function? Or add a get_hpd_status()
> callback. (I also think there are too many callbacks. For example
> we could have: setup, set_status, clear and then just use
> parameters when needed:
> void setup(bool force, bool disabled, bool rxsense)
> void set_status(bool enable, bool enable_ints)
> void clear()
>
> What do you think? I only checked quickly the code, don't know if
> this is enough.
For the record, that's more or less what I had in mind. The following
preparatory patch could be useful.
commit 5ceb6a93d78e21e5be195efe52c4c7e5578ac787
Author: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
Date: Fri Mar 3 14:14:56 2017 +0200
drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function
In preparation for adding PHY operations to handle RX SENSE and HPD,
group all the PHY interrupt setup code in a single location and extract
it to a separate function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index 026a0dce7661..1ed8bc12eed7 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -1496,7 +1496,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct
drm_display_mode *mode)
}
/* Wait until we are registered to enable interrupts */
-static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
+static void dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
{
hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL,
HDMI_PHY_I2CM_INT_ADDR);
@@ -1504,15 +1504,6 @@ static int dw_hdmi_fb_registered(struct dw_hdmi *hdmi)
hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL |
HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL,
HDMI_PHY_I2CM_CTLINT_ADDR);
-
- /* enable cable hot plug irq */
- hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
-
- /* Clear Hotplug interrupts */
- hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
- HDMI_IH_PHY_STAT0);
-
- return 0;
}
static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
@@ -1630,6 +1621,26 @@ static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
}
+static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi)
+{
+ /*
+ * Configure the PHY RX SENSE and HPD interrupts polarities and clear
+ * any pending interrupt.
+ */
+ hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
+ hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+ HDMI_IH_PHY_STAT0);
+
+ /* Enable cable hot plug irq. */
+ hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+
+ /* Clear and unmute interrupts. */
+ hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+ HDMI_IH_PHY_STAT0);
+ hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+ HDMI_IH_MUTE_PHY_STAT0);
+}
+
static enum drm_connector_status
dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
{
@@ -2141,29 +2152,14 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->ddc = NULL;
}
- /*
- * Configure registers related to HDMI interrupt
- * generation before registering IRQ.
- */
- hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
-
- /* Clear Hotplug interrupts */
- hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
- HDMI_IH_PHY_STAT0);
-
hdmi->bridge.driver_private = hdmi;
hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
#ifdef CONFIG_OF
hdmi->bridge.of_node = pdev->dev.of_node;
#endif
- ret = dw_hdmi_fb_registered(hdmi);
- if (ret)
- goto err_iahb;
-
- /* Unmute interrupts */
- hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
- HDMI_IH_MUTE_PHY_STAT0);
+ dw_hdmi_fb_registered(hdmi);
+ dw_hdmi_phy_setup_hpd(hdmi);
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
--
Regards,
Laurent Pinchart
