On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it...
Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com> Cc: <sta...@vger.kernel.org> # v4.1+ Fixes: 017b5522d5e3 ("ARM: at91: Add new binding for sama5d3-ddramc") --- arch/arm/mach-at91/pm.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 3d89b7905bd9..a277981f414d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -289,6 +289,22 @@ static void at91_ddr_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } +static void sama5d3_ddr_standby(void) +{ + u32 lpr0; + u32 saved_lpr0; + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN; + + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); +} + /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ @@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby }, { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby }, { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby }, - { .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby }, + { .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby }, { /*sentinel*/ } }; -- 2.9.0