Jean Delvare wrote:
> On Mon, 19 Mar 2007 17:43:38 -0400, Bob Copeland wrote:
>
>> I tried out an earlier version of this patch several months ago just to play
>> around with the joystick part of the accelerometer driver on my MacBook, and
>> found that it was backwards in the y-direction compared to what Neverball
>> seemed to want (of course, NB has no way to invert the joystick). I think
>> I just did something like this in my own copy:
>>
>> + y = -y;
>> input_report_abs(applesmc_idev, ABS_X, x - rest_x);
>> input_report_abs(applesmc_idev, ABS_Y, y - rest_y);
>>
>> I don't claim you necessarily want to change it, but thought I'd pass it
>> along.
>>
>
> This appears to be a common problem with these devices, the hdaps driver
> (IBM) needs to invert the axis on some models too, and I seem to
> remember something similar for the (not yet merged) HP laptops
> accelerometer driver.
>
Ok, so let's invert the axis on the input device.
I think the raw x value in sysfs behaves the same way as hdaps (because
tools like hdaps-gl don't need any inversion), so I don't invert it.
Anyone with an IBM laptop could confirm this please?
- x value gets more positive when you lift the right side on the laptop
(= tilted to the left)
- y value gets more negative when you tilt the laptop backwards
(simply cat /sys/devices/platform/hdaps/position)
Thanks,
Best regards,
Nicolas
Invert x axis on applesmc input device to make it usable as a joystick.
Signed-off-by: Nicolas Boichat <[EMAIL PROTECTED]>
---
drivers/hwmon/applesmc.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 4060667..581ed3e 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -349,6 +349,7 @@ static void applesmc_calibrate(void)
{
applesmc_read_motion_sensor(SENSOR_X, &rest_x);
applesmc_read_motion_sensor(SENSOR_Y, &rest_y);
+ rest_x = -rest_x;
}
static void applesmc_mousedev_poll(unsigned long unused)
@@ -366,6 +367,7 @@ static void applesmc_mousedev_poll(unsigned long unused)
if (applesmc_read_motion_sensor(SENSOR_Y, &y))
goto out;
+ x = -x;
input_report_abs(applesmc_idev, ABS_X, x - rest_x);
input_report_abs(applesmc_idev, ABS_Y, y - rest_y);
input_sync(applesmc_idev);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
