Am Freitag, 3. März 2017, 17:49:09 CET schrieb Huibin Hong:
> Addd dmac bus and dmac peri dts nodes for peripherals,
> such as I2S, SPI, UART and so on.
>
> Signed-off-by: Huibin Hong <[email protected]>
applied for 4.12, with the changes described below
> ---
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 31
> +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a635adc..c9be1b2 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -204,6 +204,37 @@
> <&cpu_b2>, <&cpu_b3>;
> };
>
> + amba {
moved "amba" above "arm-pmu", please mind the alphabetical ordering in the
future.
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + dmac_peri: dma-controller@ff250000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xff250000 0x0 0x4000>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + clocks = <&cru ACLK_DMAC_PERI>;
> + clock-names = "apb_pclk";
> + arm,pl330-broken-no-flushp;
> + peripherals-req-type-burst;
dropped peripherals-req-type-burst, as it is not part of mainline (yet?).
Please send a patch readding that if it gets submitted and accepted at some
point.
Heiko
