On 14/02/17 19:01, Gregory CLEMENT wrote:
> From: Hu Ziji <huz...@marvell.com>
>
> Add Xenon eMMC/SD/SDIO host controller core functionality.
> Add Xenon specific initialization process.
> Add Xenon specific mmc_host_ops APIs.
> Add Xenon specific register definitions.
>
> Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
>
> Marvell Xenon SDHC conforms to SD Physical Layer Specification
> Version 3.01 and is designed according to the guidelines provided
> in the SD Host Controller Standard Specification Version 3.00.
>
> Signed-off-by: Hu Ziji <huz...@marvell.com>
> Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
A few minor comments below.
> ---
> drivers/mmc/host/Kconfig | 9 +-
> drivers/mmc/host/Makefile | 3 +-
> drivers/mmc/host/sdhci-xenon.c | 602 ++++++++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci-xenon.h | 70 ++++-
> 4 files changed, 684 insertions(+)
> create mode 100644 drivers/mmc/host/sdhci-xenon.c
> create mode 100644 drivers/mmc/host/sdhci-xenon.h
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 2eb97014dc3f..1c1a88bfbdad 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -819,3 +819,12 @@ config MMC_SDHCI_BRCMSTB
> Broadcom STB SoCs.
>
> If unsure, say Y.
> +
> +config MMC_SDHCI_XENON
> + tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
> + depends on MMC_SDHCI_PLTFM
> + help
> + This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
> + If you have a machine with integrated Marvell Xenon SDHC IP,
> + say Y or M here.
> + If unsure, say N.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index ccc9c4cba154..b0a2ab4b256e 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -82,3 +82,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB) +=
> sdhci-brcmstb.o
> ifeq ($(CONFIG_CB710_DEBUG),y)
> CFLAGS-cb710-mmc += -DDEBUG
> endif
> +
> +obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
> +sdhci-xenon-driver-y += sdhci-xenon.o
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> new file mode 100644
> index 000000000000..e633f803907a
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -0,0 +1,602 @@
> +/*
> + * Driver for Marvell Xenon SDHC as a platform device
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author: Hu Ziji <huz...@marvell.com>
> + * Date: 2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * Inspired by Jisheng Zhang <jszh...@marvell.com>
> + * Special thanks to Video BG4 project team.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include "sdhci-pltfm.h"
> +#include "sdhci-xenon.h"
> +
> +static int enable_xenon_internal_clk(struct sdhci_host *host)
> +{
> + u32 reg;
> + u8 timeout;
> +
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg |= SDHCI_CLOCK_INT_EN;
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> + /* Wait max 20 ms */
> + timeout = 20;
> + while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> + & SDHCI_CLOCK_INT_STABLE)) {
> + if (timeout == 0) {
> + pr_err("%s: Internal clock never stabilised.\n",
> + mmc_hostname(host->mmc));
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + mdelay(1);
If it takes a lot less than 1 ms this can waste time. See recent patch
"mmc: sdhci: Optimize delay loops"
> + }
> +
> + return 0;
> +}
> +
> +/* Set SDCLK-off-while-idle */
> +static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
> + unsigned char sdhc_id, bool enable)
> +{
> + u32 reg;
> + u32 mask;
> +
> + reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
> + /* Get the bit shift basing on the SDHC index */
> + mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
> + if (enable)
> + reg |= mask;
> + else
> + reg &= ~mask;
> +
> + sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
> +}
> +
> +/* Enable/Disable the Auto Clock Gating function */
> +static void xenon_set_acg(struct sdhci_host *host, bool enable)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
> + if (enable)
> + reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK;
> + else
> + reg |= XENON_AUTO_CLKGATE_DISABLE_MASK;
> + sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
> +}
> +
> +/* Enable this SDHC */
> +static void xenon_enable_sdhc(struct sdhci_host *host,
> + unsigned char sdhc_id)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
> + reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
> + sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
> +
> + /*
> + * Manually set the flag which all the card types require,
> + * including SD, eMMC, SDIO
> + */
> + host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
> +}
> +
> +/* Disable this SDHC */
> +static void xenon_disable_sdhc(struct sdhci_host *host,
> + unsigned char sdhc_id)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
> + reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
> + sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
> +}
> +
> +/* Enable Parallel Transfer Mode */
> +static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
> + unsigned char sdhc_id)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
> + reg |= BIT(sdhc_id);
> + sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
> +}
> +
> +/* Mask command conflict error */
> +static void xenon_mask_cmd_conflict_err(struct sdhci_host *host)
> +{
> + u32 reg;
> +
> + reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
> + reg |= XENON_MASK_CMD_CONFLICT_ERR;
> + sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
> +}
> +
> +static void xenon_sdhc_retune_setup(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u32 reg;
> +
> + /* Disable the Re-Tuning Request functionality */
> + reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL);
> + reg &= ~XENON_RETUNING_COMPATIBLE;
> + sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL);
> +
> + /* Disable the Re-tuning Interrupt */
> + reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
> + reg &= ~SDHCI_INT_RETUNE;
> + sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
> + reg = sdhci_readl(host, SDHCI_INT_ENABLE);
> + reg &= ~SDHCI_INT_RETUNE;
> + sdhci_writel(host, reg, SDHCI_INT_ENABLE);
> +
> + /* Force to use Tuning Mode 1 */
> + host->tuning_mode = SDHCI_TUNING_MODE_1;
> + /* Set re-tuning period */
> + host->tuning_count = 1 << (priv->tuning_count - 1);
> +}
> +
> +/*
> + * Operations inside struct sdhci_ops
> + */
> +/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
> +static void sdhci_xenon_reset_exit(struct sdhci_host *host,
> + unsigned char sdhc_id, u8 mask)
> +{
> + /* Only SOFTWARE RESET ALL will clear the register setting */
> + if (!(mask & SDHCI_RESET_ALL))
> + return;
> +
> + /* Disable tuning request and auto-retuning again */
> + xenon_sdhc_retune_setup(host);
> +
> + xenon_set_acg(host, true);
> +
> + xenon_set_sdclk_off_idle(host, sdhc_id, false);
> +
> + xenon_mask_cmd_conflict_err(host);
> +}
> +
> +static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + sdhci_reset(host, mask);
> + sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
> +}
> +
> +/*
> + * Xenon defines different values for HS200 and HS400
> + * in Host_Control_2
> + */
> +static void xenon_set_uhs_signaling(struct sdhci_host *host,
> + unsigned int timing)
> +{
> + u16 ctrl_2;
> +
> + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + /* Select Bus Speed Mode for host */
> + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
> + if (timing == MMC_TIMING_MMC_HS200)
> + ctrl_2 |= XENON_CTRL_HS200;
> + else if (timing == MMC_TIMING_UHS_SDR104)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
> + else if (timing == MMC_TIMING_UHS_SDR12)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
> + else if (timing == MMC_TIMING_UHS_SDR25)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
> + else if (timing == MMC_TIMING_UHS_SDR50)
> + ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
> + else if ((timing == MMC_TIMING_UHS_DDR50) ||
> + (timing == MMC_TIMING_MMC_DDR52))
> + ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
> + else if (timing == MMC_TIMING_MMC_HS400)
> + ctrl_2 |= XENON_CTRL_HS400;
> + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +}
> +
> +static const struct sdhci_ops sdhci_xenon_ops = {
> + .set_clock = sdhci_set_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_xenon_reset,
> + .set_uhs_signaling = xenon_set_uhs_signaling,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
> + .ops = &sdhci_xenon_ops,
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
> + SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
> + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
> +};
> +
> +/*
> + * Xenon Specific Operations in mmc_host_ops
> + */
> +static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + unsigned long flags;
> + u32 reg;
> +
> + /*
> + * HS400/HS200/eMMC HS doesn't have Preset Value register.
> + * However, sdhci_set_ios will read HS400/HS200 Preset register.
> + * Disable Preset Value register for HS400/HS200.
> + * eMMC HS with preset_enabled set will trigger a bug in
> + * get_preset_value().
> + */
> + spin_lock_irqsave(&host->lock, flags);
We are no longer using the spin lock in set_ios. See recent patch "mmc:
sdhci: Do not use spin lock in set_ios paths"
> + if ((ios->timing == MMC_TIMING_MMC_HS400) ||
> + (ios->timing == MMC_TIMING_MMC_HS200) ||
> + (ios->timing == MMC_TIMING_MMC_HS)) {
> + host->preset_enabled = false;
> + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + host->flags &= ~SDHCI_PV_ENABLED;
> +
> + reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
> + sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
> + } else {
> + host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
> + }
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + sdhci_set_ios(mmc, ios);
> +
> + if (host->clock > XENON_DEFAULT_SDCLK_FREQ) {
> + spin_lock_irqsave(&host->lock, flags);
> + xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
> + spin_unlock_irqrestore(&host->lock, flags);
> + }
> +}
> +
> +static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + unsigned char voltage = ios->signal_voltage;
> + struct sdhci_host *host = mmc_priv(mmc);
> + unsigned char voltage_code;
> + u32 ctrl;
> +
> + if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
> + (voltage == MMC_SIGNAL_VOLTAGE_180)) {
> + if (voltage == MMC_SIGNAL_VOLTAGE_330)
> + voltage_code = XENON_EMMC_VCCQ_3_3V;
> + else if (voltage == MMC_SIGNAL_VOLTAGE_180)
> + voltage_code = XENON_EMMC_VCCQ_1_8V;
> +
> + /*
> + * This host is for eMMC, XENON self-defined
> + * eMMC control register should be accessed
> + * instead of Host Control 2
> + */
> + ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
> + ctrl &= ~XENON_EMMC_VCCQ_MASK;
> + ctrl |= voltage_code;
> + sdhci_writel(host, ctrl, XENON_SLOT_EMMC_CTRL);
> +
> + /* There is no standard to determine this waiting period */
> + usleep_range(1000, 2000);
> +
> + /* Check whether io voltage switch is done */
> + ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
> + ctrl &= XENON_EMMC_VCCQ_MASK;
> + /*
> + * This bit is set only when regulator feeds back
> + * the voltage switch results to Xenon SDHC.
> + * However, in actaul implementation, regulator might not
actaul -> actual
> + * provide this feedback.
> + * Thus we shall not rely on this bit to determine
> + * if switch failed.
> + * If the bit is not set, just throw a message.
> + * Besides, error code should not be returned.
> + */
> + if (ctrl != voltage_code)
> + dev_info(mmc_dev(mmc), "fail to detect eMMC signal
> voltage stable\n");
> + return 0;
> + }
> +
> + dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
> + return -EINVAL;
> +}
> +
> +static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + /*
> + * Before SD/SDIO set signal voltage, SD bus clock should be
> + * disabled. However, sdhci_set_clock will also disable the Internal
> + * clock in mmc_set_signal_voltage().
> + * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
> + * Thus here manually enable internal clock.
> + *
> + * After switch completes, it is unnecessary to disable internal clock,
> + * since keeping internal clock active obeys SD spec.
> + */
> + enable_xenon_internal_clk(host);
> +
> + if (priv->init_card_type == MMC_TYPE_MMC)
> + return xenon_emmc_signal_voltage_switch(mmc, ios);
> +
> + return sdhci_start_signal_voltage_switch(mmc, ios);
> +}
> +
> +/*
> + * Update card type.
> + * priv->init_card_type will be used in PHY timing adjustment.
> + */
> +static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + /* Update card type*/
> + priv->init_card_type = card->type;
> +}
> +
> +static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (host->timing == MMC_TIMING_UHS_DDR50)
> + return 0;
> +
> + /*
> + * Currently force Xenon driver back to support mode 1 only,
> + * even though Xenon might claim to support mode 2 or mode 3.
> + * It requires more time to test mode 2/mode 3 on more platforms.
> + */
> + if (host->tuning_mode != SDHCI_TUNING_MODE_1)
> + xenon_sdhc_retune_setup(host);
> +
> + return sdhci_execute_tuning(mmc, opcode);
> +}
> +
> +static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u32 reg;
> + u8 sdhc_id = priv->sdhc_id;
> +
> + sdhci_enable_sdio_irq(mmc, enable);
> +
> + if (enable) {
> + /*
> + * Set SDIO Card Inserted indication
> + * to enable detecting SDIO async irq.
> + */
> + reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
> + reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
> + sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
> + } else {
> + /* Clear SDIO Card Inserted indication */
> + reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
> + reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
> + sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
> + }
> +}
> +
> +static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
> +{
> + host->mmc_host_ops.set_ios = xenon_set_ios;
> + host->mmc_host_ops.start_signal_voltage_switch =
> + xenon_start_signal_voltage_switch;
> + host->mmc_host_ops.init_card = xenon_init_card;
> + host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
> + host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
> +}
> +
> +/*
> + * Parse Xenon specific DT properties:
> + * init_card_type: check whether this SDHC is for eMMC
> + * sdhc-id: the index of current SDHC.
> + * Refer to XENON_SYS_CFG_INFO register
> + * tun-count: the interval between re-tuning
> + */
> +static int xenon_probe_dt(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct mmc_host *mmc = host->mmc;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u32 sdhc_id, nr_sdhc;
> + u32 tuning_count;
> +
> + /* Disable HS200 on Armada AP806 */
> + if (of_device_is_compatible(np, "marvell,armada-ap806-sdhci"))
> + host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
> +
> + priv->init_card_type = XENON_CARD_TYPE_UNKNOWN;
> + /* Check if mmc-card sub-node exists */
> + if (mmc_of_parse_mmc_card(mmc)) {
> + priv->init_card_type = MMC_TYPE_MMC;
> + /*
> + * Force to clear BUS_TEST to
> + * skip bus_test_pre and bus_test_post
> + */
> + mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
> + }
> +
> + priv->sdhc_id = 0x0;
> + if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
> + nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
> + nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
> + if (unlikely(sdhc_id > nr_sdhc)) {
> + dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of
> SDHCs %d\n",
> + sdhc_id, nr_sdhc);
> + return -EINVAL;
> + }
> + }
> +
> + tuning_count = XENON_DEF_TUNING_COUNT;
> + if (!of_property_read_u32(np, "marvell,xenon-tun-count",
> + &tuning_count)) {
> + if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
> + dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set
> default value %d\n",
> + XENON_DEF_TUNING_COUNT);
> + tuning_count = XENON_DEF_TUNING_COUNT;
> + }
> + }
> + priv->tuning_count = tuning_count;
> +
> + return 0;
> +}
> +
> +static int xenon_sdhc_probe(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u8 sdhc_id = priv->sdhc_id;
> +
> + /* Enable SDHC */
> + xenon_enable_sdhc(host, sdhc_id);
> +
> + /* Enable ACG */
> + xenon_set_acg(host, true);
> +
> + /* Enable Parallel Transfer Mode */
> + xenon_enable_sdhc_parallel_tran(host, sdhc_id);
> +
> + xenon_mask_cmd_conflict_err(host);
> +
> + return 0;
> +}
> +
> +static void xenon_sdhc_remove(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + u8 sdhc_id = priv->sdhc_id;
> +
> + /* disable SDHC */
> + xenon_disable_sdhc(host, sdhc_id);
> +}
> +
> +static int sdhci_xenon_probe(struct platform_device *pdev)
> +{
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_host *host;
> + struct sdhci_xenon_priv *priv;
> + int err;
> +
> + host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
> + sizeof(struct sdhci_xenon_priv));
> + if (IS_ERR(host))
> + return PTR_ERR(host);
> +
> + pltfm_host = sdhci_priv(host);
> + priv = sdhci_pltfm_priv(pltfm_host);
> +
> + xenon_set_acg(host, false);
> +
> + /*
> + * Link Xenon specific mmc_host_ops function,
> + * to replace standard ones in sdhci_ops.
> + */
> + xenon_replace_mmc_host_ops(host);
> +
> + pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> + if (IS_ERR(pltfm_host->clk)) {
> + err = PTR_ERR(pltfm_host->clk);
> + dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
> + goto free_pltfm;
> + }
> + err = clk_prepare_enable(pltfm_host->clk);
> + if (err)
> + goto free_pltfm;
> +
> + err = mmc_of_parse(host->mmc);
> + if (err)
> + goto err_clk;
> +
> + sdhci_get_of_property(pdev);
> +
> + /* Xenon specific dt parse */
> + err = xenon_probe_dt(pdev);
> + if (err)
> + goto err_clk;
> +
> + err = xenon_sdhc_probe(host);
> + if (err)
> + goto err_clk;
> +
> + err = sdhci_add_host(host);
> + if (err)
> + goto remove_sdhc;
> +
> + return 0;
> +
> +remove_sdhc:
> + xenon_sdhc_remove(host);
> +err_clk:
> + clk_disable_unprepare(pltfm_host->clk);
> +free_pltfm:
> + sdhci_pltfm_free(pdev);
> + return err;
> +}
> +
> +static int sdhci_xenon_remove(struct platform_device *pdev)
> +{
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + xenon_sdhc_remove(host);
> +
> + sdhci_remove_host(host, 0);
> +
> + clk_disable_unprepare(pltfm_host->clk);
> +
> + sdhci_pltfm_free(pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sdhci_xenon_dt_ids[] = {
> + { .compatible = "marvell,armada-ap806-sdhci",},
> + { .compatible = "marvell,armada-cp110-sdhci",},
> + { .compatible = "marvell,armada-3700-sdhci",},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
> +
> +static struct platform_driver sdhci_xenon_driver = {
> + .driver = {
> + .name = "xenon-sdhci",
> + .of_match_table = sdhci_xenon_dt_ids,
> + .pm = &sdhci_pltfm_pmops,
> + },
> + .probe = sdhci_xenon_probe,
> + .remove = sdhci_xenon_remove,
> +};
> +
> +module_platform_driver(sdhci_xenon_driver);
> +
> +MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
> +MODULE_AUTHOR("Hu Ziji <huz...@marvell.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> new file mode 100644
> index 000000000000..69de711db9eb
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author: Hu Ziji <huz...@marvell.com>
> + * Date: 2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +#ifndef SDHCI_XENON_H_
> +#define SDHCI_XENON_H_
> +
> +/* Register Offset of Xenon SDHC self-defined register */
> +#define XENON_SYS_CFG_INFO 0x0104
> +#define XENON_SLOT_TYPE_SDIO_SHIFT 24
> +#define XENON_NR_SUPPORTED_SLOT_MASK 0x7
> +
> +#define XENON_SYS_OP_CTRL 0x0108
> +#define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20)
> +#define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8
> +#define XENON_SLOT_ENABLE_SHIFT 0
> +
> +#define XENON_SYS_EXT_OP_CTRL 0x010C
> +#define XENON_MASK_CMD_CONFLICT_ERR BIT(8)
> +
> +#define XENON_SLOT_EMMC_CTRL 0x0130
> +#define XENON_EMMC_VCCQ_MASK 0x3
> +#define XENON_EMMC_VCCQ_1_8V 0x1
> +#define XENON_EMMC_VCCQ_3_3V 0x3
> +
> +#define XENON_SLOT_RETUNING_REQ_CTRL 0x0144
> +/* retuning compatible */
> +#define XENON_RETUNING_COMPATIBLE 0x1
> +
> +/* Tuning Parameter */
> +#define XENON_TMR_RETUN_NO_PRESENT 0xF
> +#define XENON_DEF_TUNING_COUNT 0x9
> +
> +#define XENON_DEFAULT_SDCLK_FREQ 400000
> +
> +/* Xenon specific Mode Select value */
> +#define XENON_CTRL_HS200 0x5
> +#define XENON_CTRL_HS400 0x6
> +
> +/* Indicate Card Type is not clear yet */
> +#define XENON_CARD_TYPE_UNKNOWN 0xF
> +
> +struct sdhci_xenon_priv {
> + unsigned char tuning_count;
> + /* idx of SDHC */
> + u8 sdhc_id;
> +
> + /*
> + * eMMC/SD/SDIO require different PHY settings or
> + * voltage control. It's necessary for Xenon driver to
> + * recognize card type during, or even before initialization.
> + * However, mmc_host->card is not available yet at that time.
> + * This field records the card type during init.
> + * For eMMC, it is updated in dt parse. For SD/SDIO, it is
> + * updated in xenon_init_card().
> + *
> + * It is only valid during initialization after it is updated.
> + * Do not access this variable in normal transfers after
> + * initialization completes.
> + */
> + unsigned int init_card_type;
> +};
> +
> +#endif
>
