Set the correct voltage select register for LDO2.
Signed-off-by: Wadim Egorov <w.ego...@phytec.de>
---
drivers/regulator/rk808-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/rk808-regulator.c
b/drivers/regulator/rk808-regulator.c
index fb44d52..a16d814 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -519,7 +519,7 @@ static int rk808_set_suspend_disable(struct regulator_dev
*rdev)
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
- RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
--
1.9.1
