From: Jagan Teki <[email protected]> Add touchscreen node as i2c1 slave device on Engicam Is.IoT MX6UL modules, the touchscreen controlled 'st,stmpe-ts' connected via i2c with st,stmpe811 mfb interface.
Cc: Shawn Guo <[email protected]> Cc: Matteo Lisi <[email protected]> Cc: Michael Trimarchi <[email protected]> Signed-off-by: Jagan Teki <[email protected]> --- arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 34 ++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi index 9660e20..b149b5e 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi @@ -40,6 +40,34 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +&i2c1 { + touch: stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe_ts>; + interrupt-parent = <&gpio1>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat @@ -104,4 +132,10 @@ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 >; }; + + pinctrl_stmpe_ts: stmpe-tsgrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 + >; + }; }; -- 1.9.1
